M4rsl

[M4rsl]

Thank you…

I need to try this then… right now my VPINSPA folder is in the same directory as VPINMAME…

Will let you know how I get on …

 

Thanks

 

 

You need to login in order to like this post: click here

[M4rsl]

Hello Ronald71

it seems there is no fix for the flickering DMD on the GB table. There was a suggestion to leave a copy of the 1.7.1 DLL and INI files in the SPA folder and update the DMDext files elsewhere…. I have tried that, but it did not work….

Not sure if have done this incorrectly though…

Best

 

You need to login in order to like this post: click here

[M4rsl]

Onevox (PeteM) wrote:

If you ever want more of these, I did a lot of neon several years back as topper videos. Bally. Gottlieb SS. Gottlieb EM era. Williams. and several generics. Not sure they’ll fit your DMD but probably easily resized. Also did some non neon for Taito, Atari, Sega, Data East, Stern, etc. They’re over at VPUniverse under “topper videos.”

Thanks for the tip. I think I have seen those a while ago…

Best!

You need to login in order to like this post: click here

[M4rsl]

M4rsl wrote:

drumdude777 wrote:

Very nice. what kid of performance are you getting on the 4k tables? are you generally on medium, or high settings, or? what kind of FPS are you gettig on tables in 4k? thanks!

Hi,

thank you!

I generally get very smooth performance… can check fps for you, any particular table you’d be interested in comparing?

regards

Hi,

it’s running at 50-75 fps with quality FXAA on, most at 60fps+ , I can run 4x SSAA on most tables but a few (e.g TAF) drop to 40fps

Latest version of TOM:

rgds

You need to login in order to like this post: click here

[M4rsl]

outhere wrote:

If you have other problems report them in the same place

That is already being looked into — https://github.com/freezy/dmd-extensions/issues/237

Will do, thanks

You need to login in order to like this post: click here

[M4rsl]

drumdude777 wrote:

Very nice. what kid of performance are you getting on the 4k tables? are you generally on medium, or high settings, or? what kind of FPS are you gettig on tables in 4k? thanks!

Hi,

thank you!

I generally get very smooth performance… can check fps for you, any particular table you’d be interested in comparing?

 

regards

You need to login in order to like this post: click here

[M4rsl]

M4rsl wrote:

outhere wrote:

Did you try going back to the old stuff?

Did you make sure the files are unblocked?

Did it install in the right location?

This is what I did

I downloaded the Zip file – dmdext-1.8.0-r122-x86-Release.zip

https://ci.appveyor.com/project/freezy/dmd-extensions/builds/32615675/job/rhlv555mkn3595w5/artifacts

Freezy’s Latest Now supports color layer mode — Like the color DMD for White Water

1.8 r122 — The only file I used so-far – DmdDevice.dll

Seem to work fine

Tested on a Pin2DMD and a LCD

–

If your coming from Freezy 1.71 You will need yo add this to your DmdDevice.ini file

[alphanumeric]

enabled = false

Thanks… I am going to try this later today

Will let you know what I find.

Seems the DMDext is different from the 1.7.1 version as well by the way. For one it is a different size, plus it has its Windows icon now (not that that matters)

No need to replace that?

Best

Hi…

 

so… tried just replacing the dll, which seems to work for most games. However, Ghostbusters LE’s DMD occasionally flickers some dots, but is mostly black, and it seems CCC acted funny, but could be wrong…. the backglass would no longer close… may have been some other problem though.

anyway, reverted back to the 1.7.1 dll to get everything working again.

You need to login in order to like this post: click here

[M4rsl]

outhere wrote:

Did you try going back to the old stuff?

Did you make sure the files are unblocked?

Did it install in the right location?

This is what I did

I downloaded the Zip file – dmdext-1.8.0-r122-x86-Release.zip

https://ci.appveyor.com/project/freezy/dmd-extensions/builds/32615675/job/rhlv555mkn3595w5/artifacts

Freezy’s Latest Now supports color layer mode — Like the color DMD for White Water

1.8 r122 — The only file I used so-far – DmdDevice.dll

Seem to work fine

Tested on a Pin2DMD and a LCD

–

If your coming from Freezy 1.71 You will need yo add this to your DmdDevice.ini file

[alphanumeric]

enabled = false

Thanks… I am going to try this later today

Will let you know what I find.

 

Seems the DMDext is different from the 1.7.1 version as well by the way. For one it is a different size, plus it has its Windows icon now (not that that matters)

No need to replace that?

 

Best

You need to login in order to like this post: click here

[M4rsl]

Thanks for your response…

yes I did and it seems the same…

Pin2DMD is set to true still

Plus, I understand from reading the notes, the installer should not touch the ini file…

…

puzzled..

Will take some snapshot tomorrow..

 

Best

You need to login in order to like this post: click here

1 user thanked author for this post.

jcksu3

[M4rsl]

Yabba-dabba-this-is-awesome…. agree with earlier feedback this being one of the better tables made….

You need to login in order to like this post: click here

[M4rsl]

Welcome to earth…!!!

Awesome table, thanks!

You need to login in order to like this post: click here

[M4rsl]

Thanks….I figured it out when reading the installation instructions for pinup player again. It kind of makes you think you’re installing the latest version, when going through nailbusters guide, but he did in fact leave a note saying you have to follow a link to get the most recent version instead of 1.4 (in the guide)

anyway… that solved it… thanks again

You need to login in order to like this post: click here

[M4rsl]

Radically awesome master Splinter!

:)

You need to login in order to like this post: click here

[M4rsl]

Great pup build… brings back old memories…

I have a question though… everytime the screen 7 overlay play, everything above the message turns blue…  what am I doing wrong?

Thanks!

You need to login in order to like this post: click here

[Author]

Posts