sparky

[sparky]

hi, thanks for this table. it looks great..

thanks again///sparky

You need to login in order to like this post: click here

1 user thanked author for this post.

Siggi

[sparky]

Lol.  Thanks

You need to login in order to like this post: click here

[sparky]

Hi Haunt, thanks for the encouragement. Ill have to look further into this when i get the spare time.

Thanks. Sparky

You need to login in order to like this post: click here

[sparky]

<!–more–>Hi txt. I understand what you mean. I also can not run those few LE tables without the rom issue. I tried for a long time.

Since its only a “few” tables, i have just thought to leave well enough alone.

My system has been running fine for roughly 5 years otherwise.

I have been toying with the idea of the changing to Win 7 etc.

i just remember all those days of banging my head against the wall, working out kinks with displays/folders, and messing things up that were working till i changed something else. At the time, i had it all figured out, but now im afraid i can barely rember how to do all the little fixes. I DREAD going through that all over again.

My wife uses win7, and i sometimes have a hard time navigating it.

I may go for it soon if i have the free time, but till then i am pretty content without the few tables i cant play.

Risk vs. reward sort of thing.   Thanks. Sparky

You need to login in order to like this post: click here

[sparky]

hi hauntfreaks, thanks for your continued help.

here is a copy of my scripts folder contents

Attachments:

1. 

   scripts-folder.jpg
   

You need to login in order to like this post: click here

[sparky]

hi hauntfreaks, not sure if your reply is meant for me, but my music works correctly. 

My post a couple of posts up is about an error i am getting.

The reason i mentioned the music files was in response to daryls suggestion.

ROBWAADE, i may have to do reinstall ultradmd, but id like to avoid it for now because it works fine for me with another table, and i dont want to mess rhat one up too.

You need to login in order to like this post: click here

[sparky]

HI DARYL, thanks for the reply. i just tried 1.0 again with all 5 of the vbs files included with 1.0 in the tables folder.

i also double checked that the 10 music files are in the music folder.

i am still getting the same error.

is there anything else you can think of?  thanks///sparky

You need to login in order to like this post: click here

[sparky]

hi all, just found this table, and am excited to play it.

i have set up all the music in music folder,

5 vbs in script folder with new rules file (also tried tables folder),

kiss.ultradmd (127 files), 1.1.vpx and backglass in tables folder.

ultradmd 1.4 16050500

VP10.2.1

i am getting these errors “the remote server machine does not exist or is unavailable:ultradmd.isrendering”, then

“the remote server machine does not exist or is unavailable:ultradmd.clear”

this seems to occur almost always after a ball drain.

i tried the fix mentioned at the top of page 7 in this thread

“remove 00 from both DisplayScoreboard00” in kissdmdv2 file, but no luck.

id really love to give this table some play, because it looks fantastic.

also, table seems to be set to auto launch. anyone know how i can disable that..

i am running XP, but ultradmd 1.4 16050500 works fine for AMH

all help is appreciated…if any other info is neede, please let me know..thanks////sparky

You need to login in order to like this post: click here

[sparky]

hi guys, id love to try this table. i may have to disable the db2s backglass to get it working, but i cant figure out how to change the script for this table. usually i would change bss.server to VPinMAME.Controller, but i cant seem to find where to change it…anybody know how?//thanks/sparky

You need to login in order to like this post: click here

[sparky]

hi, can soebody please explain how to change the settings for FS?

i have landscape settings xml, but what do i do with it?  thanks/sparky

 

You need to login in order to like this post: click here

[sparky]

ok fren, i understand, ill keep playing around with it, and hopefully something will magically happen…

for now ill keep playing the pm5 version.

i did find a couple of minor issues with it, but i will post them there soon.

thanks to everybody for their help!!!/sparky

You need to login in order to like this post: click here

[sparky]

randr, i dont recall if my vid card is 1gb or 2..

but,, i have been trying out different roms, TOTALLY different roms

i tried pre SAM roms, and the table loads, and goes into attract mode just fine, but since the switch matrix is totally different, the dmd usually says missing balls. therefore i cant start a game to get any further.

i tried LOTR  and simpson pinball party, monopoly, even tommy and apollo 13, same thing.

these are all understandable, because the switches that detect the balls, must be layed out completely different…..

Even williams roms load up properly, but the slam tilt switch get tripped by the different switch matrix.

 

i would have to believe that since the playfield graphics load up 100% and goes into attract mode with these OLDER roms, that it must be some sort of glitch with SAM ROMS, OF COURSE i could also be wrong…

i only get the rom loading issue when calling for a SAM ROM like twd, mustang, acdc, star trek, metallica, etc.. on THIS table.

but i know all of these roms are good because they all work properly on tables other than this.

what do you thik about this, since the table loads with the pre SAM roms/  thanks//sparky

 

You need to login in order to like this post: click here

[sparky]

running XP

i5 3.20 GHZ

2.96GB RAM

 

VID CARDS

GFORCE GTX 650

GFORCE 8400GS

 

this would be the first table that i havnt been able to run……..

thanks

 

You need to login in order to like this post: click here

[sparky]

thanks bonz and randr….

 

i am running fullscreen.

i changed ddraw to 0, and still no luck…

also lowered video to 512, and no backglass … still getting rom error.

 

any other possibilities?  thanks again///sparky

You need to login in order to like this post: click here

[sparky]

hi randr, thanks for the quick help!

 

i adjusted the video setting down to 1024, and got past that error…

now i am getting an error that says to check the rom/rompath.

however, i know that the rom is the correct one, AND that it works perfectly with the PM5 version of this table.

i have had this problem on the mustang table, and so did at least one other person. it was found in that table, that using the b2s server could be causing the issue.

by switching to vpinmame server, the rom/path error went away, and the table works for myself and others.

i tried the same fix with this table, but it wont fix it. also tried UVP SERVER. i got a little bit further with UVP server, but got  a couple of lighting script errors.

does anybody know how to get past this rom/path error?  thanks/sparky

You need to login in order to like this post: click here

[sparky]

HI fren, thanks for the table.

id like to try it, but i get an error while launching the table.

unable to create texture E_OUTOFMEMORY at render device.cpp1101

anybody know whats wrong?  thanks/sparky

You need to login in order to like this post: click here

[Author]

Posts