Cherga

[Cherga]

I managed to download and the pack is working for me with one issue – When I select option 2 (call outs on LCD DMD), the music videos on the backglass play upside down. Anyone know how to fix this?

You need to login in order to like this post: click here

[Cherga]

Great work on this, thank you. I have a 3 screen cab and the DMD image isn’t showing up on my DMD screen. I can see it in the tray but it isn’t displaying… any assistance appreciated!

You need to login in order to like this post: click here

[Cherga]

Anyone have a workaround? Alt parameter maybe?

You need to login in order to like this post: click here

[Cherga]

Another question… I’m using an LCD DMD with a default running res of 1200×600. Since Pinevent requires 4:1, is there somewhere in Pinup to set the DMD to 1200×300 ONLY for Pinevent games? Thanks again.

You need to login in order to like this post: click here

[Cherga]

Thanks for modernizing FP, Terry. I’m having issues with your sample Pinup script to disable DOFLinx for Pinevent tables. I’ve copied and added it to my script and have run DOFLinx in debug mode. My config is setup using all the recommended install locations and paths. When I start a Pinevent table in Pinup it does not pass the initial pause command to DOFLinx. I have NO_DOFLINX in Custom var 3 in Game Manager but to no avail. What does work is the following:

cd C:\DirectOutput
CMD /C DOFLinxMsg.exe HOLD_ACTIVATION=1

I don’t want to pause all FP tables, only Pinevent tables. Below is a copy of my launch script with the sample for Pinevent tables provided. Am I missing something? Thanks!

rem          FUTURE DMD. Remove “rem” on next 2 lines if you are using FutureDMD. Change the directory to where you have FutureDMD installed.

cd “c:\games\Future Pinball”
START “” “FutureDMD.exe” table=”[GAMENAME]”  close=1
START “” “[STARTDIR]Launch\VPXSTARTER.exe” 5 5 20 “Future Pinball”
rem   This will load Future Pinball and your selected table using BAM (Better Arcade Mode).
START “” “[DIREMU]\FPLoader.exe” /open “[GAMEFULLNAME]” /play /exit /arcaderender /STAYINRAM

cd /d c:\directoutput
if “[custom3]”==”NO_DOFLINX” (DOFLinxMsg HOLD_ACTIVATION=1)

 

You need to login in order to like this post: click here

[Cherga]

Same issue here. DOF was working fine until I installed FP and needed to run Pinup as Admin in order to exit FP tables cleanly. DOF works fine in everything except pinup. At first when I went back to normal with Pinup, DOF worked fine. Then I uninstalled DOF, repaired it, reinstalled and still no luck except now DOF doesn’t run in Pinup at all whether its admin or not and it’s set to “true” in Pinup. I’ve tried disabling UAC, deleting and re-registering DirectOutputCom and Pinuppopper. Does anyone have a true solution ?

You need to login in order to like this post: click here

[Cherga]

Thanks Terry, I tried that and still the same issue. As soon as VPX loads the table, the instruction card screen goes black.

You need to login in order to like this post: click here

[Cherga]

Thank you for this great table. Similar to other comments, my music is very low and effects are very loud. I’m using VPX 10.5 – is this an issue because it should be run in 10.6 beta? Thanks!

You need to login in order to like this post: click here

[Cherga]

I have no sound effects when I play… only getting flipper, bumper and pop bumpers sounds. Any idea what could be causing this? Thanks!

You need to login in order to like this post: click here

[Author]

Posts