Forum Replies Created
-
Posts
-
Anyone?
You need to login in order to like this post: click here
Ok I have tried and checked all of the troubleshooting steps. Still only this Pup Pack is giving me problems.
Here is the log from Xmen
20190808 09:06:28 Open called
20190808 09:06:28 Set Game Name thread xmn_151h
20190808 09:06:28 Start Thread Matching
20190808 09:06:28 create PuPCap
20190808 09:06:28 Init Game name:xmn_151h
20190808 09:06:28 Create Object Display
20190808 09:06:28 imagedir:C:\PinUpSystem\PuPVideos\xmn_151h\PuPCapture
20190808 09:06:28 num images 30
20190808 09:06:33 Free Object DisplayHere is the log from Lethal Weapon 3 which works
20190808 09:13:46 Open called
20190808 09:13:46 Set Game Name thread lw3_208
20190808 09:13:46 Start Thread Matching
20190808 09:13:46 create PuPCap
20190808 09:13:46 Init Game name:lw3_208
20190808 09:13:46 Create Object Display
20190808 09:13:46 imagedir:C:\PinUpSystem\PuPVideos\lw3_208\PuPCapture
20190808 09:13:46 num images 177
20190808 09:15:00 Free Object DisplayAdditionally I opened popperdoctor and loaded the xmen pup pack and it exhibits the same behavior. The X-men backglass shows for about 2 seconds then disappears. When I click on show display for the backglass I get Display #2 shown in pink.
You need to login in order to like this post: click here
Ok awesome advice, I will let you all know the results.
You need to login in order to like this post: click here
It’s working now when launched from Popper. I needed to set VPX and Vpinmame to run as administrator.
You need to login in order to like this post: click here
I am having a weird issue. When I launch the table the pup pack backglass shows initially but after the playfield appears it disappears and I see the desktop wallpaper. I have used the pup pack editor and tried every option for the backglass from show, to force on, force pop etc nothing seems to help.
???????
You need to login in order to like this post: click here
Sorry Thalmus I should have specified my bad, I did check that and DOF is working through popper, just not the adressable LED strips, all of the solenoids and flashers are working.
You need to login in order to like this post: click here
I’m not worthy!
Current Project: Perpetual updates of VPX physics.
Hey randr I’m with you, been in Field Service Engineering for 29yrs, I am almost never able to spend much time working on my pincab because I am to busy jetting around the country working LOL
You need to login in order to like this post: click here
Assuming you have PinUp Player installed and working. You download the PuP pack, unzip it using 7-zip. Copy the afm_113b folder to the PinUp System>PuP Videos folder.
You need to login in order to like this post: click here
Outhere,
Thanks, changing to debug=1 allowed me to see what the issue was. It’s working now. Now to get the plunger working and PinDMD3 working with FP.
You need to login in order to like this post: click here
Thalmus…….OMG thanks so much it’s working now.
I copied freezy’s files and left the stock ones there, no change.
I used your xdmdnative and xdmd and success it works….. Yahooo
I then ran ultradmd /c to hide the virtual and all is good.
Again thanks
You need to login in order to like this post: click here
Yep, that’s the one.
So to recap
Copy the dmddevice.dll and ini from vpinmame (freezy’s edition)
Copy xdmdnative.dll and xdmd.dll from your archive to the XDMD folder
Thanks for the help I will try it right away.
You need to login in order to like this post: click here
I have been struggling with my own issues and a DMD. However I cannot remember where, I have been searching all the forums to solutions to my issues and I read something that may apply here. I can’t find it again but it was along the lines of freezy’s dll and another trying to access the dmd at the same time. So I would make sure there aren’t any other dmddevice.dll anywhere but in the Vpinmame directory. Rename them or re locate them.
You need to login in order to like this post: click here
I have a question, is there a mark community read function anywhere in the app or the website?
If not could that be added?
You need to login in order to like this post: click here
