wrd1972's Replies – Page 28

Forum Replies Created

Viewing 12 posts - 541 through 552 (of 552 total)

← 1 2 3 … 26 27 28

Author

Posts
June 18, 2016 at 7:07 pm in reply to: Pinball Magic vpx #31879
wrd1972
Participant
@wrd1972
BorgDog wrote:

hmmm, too many balls on the table is what usually throws that error, when do you get that error?

Throws right from the beginning…when lots of balls start launching. Not been able to play longer than 30 seconds or so.

‘ play the rolling sound for each ball
For b = 0 to UBound(BOT)
If BallVel(BOT(b) ) > 1 AND BOT(b).z < 130 Then
rolling(b) = True
PlaySound(“fx_ballrolling” & b), -1, Vol(BOT(b) ), Pan(BOT(b) ), 0, Pitch(BOT(b) ), 1, 0
Else
If rolling(b) = True Then
StopSound(“fx_ballrolling” & b)
rolling(b) = False
End If
End If
Next
End Sub

Bold line is declaring error.

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

You need to login in order to like this post: click here
June 9, 2016 at 1:12 pm in reply to: Bram Stoker's Dracula (ICPjuggla & Dozer316) wip #30057
wrd1972
Participant
@wrd1972
I really want this one in my Pincab. Looks Fantastic and thanks for the pics. Dont pay any mind to the “peanut gallery”…piss one em’. Your work here, as well as every other authors work here, is greatly appreciated.

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

You need to login in order to like this post: click here
June 9, 2016 at 1:03 pm in reply to: Theatre of Magic VPX wip #30055
wrd1972
Participant
@wrd1972
Looks great. But notice that the saw blade is backwards. Just flip it and the saw teeth will be in the cutting direction. Failure to do this will result in prematurely worn out sawblades. :)

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

You need to login in order to like this post: click here
May 27, 2016 at 3:07 pm in reply to: Pinball Magic vpx #24717
wrd1972
Participant
@wrd1972
Im getting this error.

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support
Attachments:
1. error.jpg
My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

You need to login in order to like this post: click here
May 26, 2016 at 12:55 pm in reply to: Embryon(Bally 1980)BETA #24574
wrd1972
Participant
@wrd1972
Drybonz wrote:

…how bout those sexy embryo chicks? lol). I can see myself playing this a lot.

Likely the first time in history this phrase has been spoken. LOL

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

You need to login in order to like this post: click here

1 user thanked author for this post.

Drybonz
May 19, 2016 at 11:59 am in reply to: Cactus Canyon VPX wip #22904
wrd1972
Participant
@wrd1972
Holy Shit this is looking awesome. Bring it. BRING it now. ;)

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

You need to login in order to like this post: click here
January 28, 2016 at 7:18 pm in reply to: Star Trek Pro (Stern 2013) (VPX Beta 2233+) #11901
wrd1972
Participant
@wrd1972
Thanks Fren. The Vengence tweak did work. “15” is working very well with my DOF cab. I will monitor the apron stuck ball weirdness and provide any additional data that may be of use to you.

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

You need to login in order to like this post: click here
January 28, 2016 at 7:16 pm in reply to: Star Trek Pro (Stern 2013) (VPX Beta 2233+) #11899
wrd1972
Participant
@wrd1972
Due to being a total moron and drunk posting a Star Trek thread in the Metallica thread. I am now copying my thread and Frens useful reply here for others to make use of.

Fren,
I have been playing the crap out of this table and cant say enough how well it looks and plays. Many thanks for producing it.

I do however have question with the large ship animation. I have seen on my cab that when the animation starts, it can really flop around unnaturally (almost upside down) and even get stuck in an unnatural position. I dont think this is an issue with the table but more so the result of my DOF solenoids providing feedback.

Does the ship respond to the feedback shock from the solenoids? If yes, is there a way I can back the sensitivity down so that the problem does not occur on my table?

I also noticed that if two balls return to the plunger staging area during multi-ball auto launch. I have on two occasions now seen a ball get stuck on the right side apron about a few scale inches to the left of the plunger window. Seems to only happen when two balls are staged together. Just wanted to pass that along.

Thanks again for what you do.

Frens reply:
I know you mean Star Trek – you can tone down the vengeance movement pretty easily though
open the script, on line 985 you’ll see towards the end “* 50” – change that to 25 or something and try it. Mess with the number until you get the desired results!

how often do you get two balls in the plunger lane? Does it happen because one ball didn’t make it all the way out? Hmm, you could increase the plunger strength maybe to make sure all balls leave the plunger lane, or decrease the size of the “swplunger” trigger in the shooter lane (reduce the size vertically, or more easily, select the trigger and shift+down arrow twice to move it further down to reduce the trigger area)

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

You need to login in order to like this post: click here
January 28, 2016 at 3:18 pm in reply to: Metallica Pro (Stern 2013) #11879
wrd1972
Participant
@wrd1972
Oh shit. Just figured out I posted in the wrong damn thread.

Thanks for the reply. I will make those tweaks. The ball apron weirdness happened twice in one night within a total of about 20 or so plays. I will try to better determine the series of events should it happen again.

Please refer to the Star Trek thread for further comments.

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

You need to login in order to like this post: click here
January 27, 2016 at 3:19 pm in reply to: Metallica Pro (Stern 2013) #11829
wrd1972
Participant
@wrd1972
Fren,
I have been playing the crap out of this table and cant say enough how well it looks and plays. Many thanks for producing it.

I do however have question with the large ship animation. I have seen on my cab that when the animation starts, it can really flop around unnaturally (almost upside down) and even get stuck in an unnatural position. I dont think this is an issue with the table but more so the result of my DOF solenoids providing feedback.

Does the ship respond to the feedback shock from the solenoids? If yes, is there a way I can back the sensitivity down so that the problem does not occur on my table?

I also noticed that if two balls return to the plunger staging area during multi-ball auto launch. I have on two occasions now seen a ball get stuck on the right side apron about a few scale inches to the left of the plunger window. Seems to only happen when two balls are staged together. Just wanted to pass that along.

Thanks again for what you do.

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

You need to login in order to like this post: click here
January 25, 2016 at 6:20 pm in reply to: Embryon (Bally 1980) VPX #11750
wrd1972
Participant
@wrd1972
Wow this is a good looking table. I had never even heard of this one till I saw it here. One comment and question.

Holy crap this table is a CPU killer. Even though I am running an old Core2 Duo 3.3GH chip, it does very well with most all tables. With this table, both cores are maxed out during play. If I run Vsync, performance is worse at 30FPS. If I run unlimited FPS, it smooths out to about 99% or so with 130FPS. Although the table is very playable at this setting, I think I can hear my CPU whimpering during play.

At least on my rig, this table just does not like Vsync at all.

In general, I am seeing 70-80% CPU usage on most tables. So on to my question. Any recommendations for tweaks that might help with the performance of this awesome table on my cab? Just dont wanna crank the crap out of my CPU.

FTR, I am running a Nvidia GTX760 2GB video card.

Thanks

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

You need to login in order to like this post: click here
January 25, 2016 at 11:45 am in reply to: Metallica Pro (Stern 2013) #11735
wrd1972
Participant
@wrd1972
Fren,
Thank you so much for this table and your hard work. The game play and detail is just incredible.

And please all…think before you post as to avoid the drama.

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

My VP Pincab /MAME Arcade Specs: MSI Micro-ATX Z390m MOBO, Core I5-9600K CPU @ 3.70GHz, 16GB NVRAM, Nvidia 1660 Super,

40" PF Sony gaming LED TV, Dual 23" monitors in the backbox , Pinscape w. expansion board, Full DOF - Full MAME arcade support

You need to login in order to like this post: click here
Author

Posts