bha19

[bha19]

Great table. I do have a few questions.

 

1. When I hit end to change the balls per game nothing happens so what am I doing wrong?
2. When I get trip to uptown, the uptown area is active for a long time, like 1 1/2 minutes. Is this normal?

You need to login in order to like this post: click here

[bha19]

Does anybody know the default replay values for this game. I think they need to be set by me and are turned off by default. In attract mode it just shows the high scores and no replay value.

• This reply was modified 3 years, 3 months ago by bha19.

You need to login in order to like this post: click here

[bha19]

Goldchicco wrote:

@Rajo Joey

Unfortunately I can’t fix a problem that I don’t have on my end.

Total downloads on both sites is over 1K so I’m going with the flow.

Also why use the plunger low when the goal is to reach the Million on top of the Pit?

Usually a full plunge won’t land in the million, but thanks for the update.

You need to login in order to like this post: click here

[bha19]

I wish I was too, but you are correct the pit is what I am referring to. Maybe it is a ramp issue.

You need to login in order to like this post: click here

[bha19]

I found a bug in this great table. If you launch the ball just far enough so that it reaches the top of the ramp but not the big round circle (I guess the Arena) the ball gets stuck at the top of the ramp and can’t be nudged free. The is important since one is trying to reach the inner lane in the circle so the ball has to be plunged just right.

You need to login in order to like this post: click here

[bha19]

J4miePlayer wrote:

@bha19 I’ll PM you my script, will be easier

That fixed everything so thanks. Also 32assassin thanks for all your help. The new script I got does not have   Inkochnito script in it so that is why I said that. Also the b2s server I have is from 2019 and can’t seem to find anything newer.

You need to login in order to like this post: click here

[bha19]

J4miePlayer wrote:

@bha19

for the b2s check the vpx and directb2s both have the same name, if not then it tries to make the best guess

to show the credits and balls in 1 screen mode, there is a section of the script with chgLED. change the If (num < 28) to IF (num<32). Also need to have dipswitch27 set to display credits

Both table and b2s the same. If chgLED. change the If (num < 28) to IF (num<32) causes subscript out of range error.

You need to login in order to like this post: click here

[bha19]

I have a new problem with the table. If b2s is disabled in editor I get no credit or ball in play on the display. If I enable b2s my 2nd monitor shows a b2s for kings and queens Gottlieb so how do I correct this? I just want to use 1 monitor and have the balls and credits come up. I even added the script by Inkochnito at the end of the table but that did not help.

You need to login in order to like this post: click here

[bha19]

So when I switched the lines in the script to start the ball with the gate closed should not the arrow be off, because it is not.

You need to login in order to like this post: click here

[bha19]

After more play testing it seems that the gate works if you do the swap I mentioned, but the arrow does not always sink with the gate.

You need to login in order to like this post: click here

[bha19]

Great table so thanks. My brother’s wife is Spanish so I got to go to the wedding back in the day (I guess the 1980’s) and took a tour of Spain as well. I was able to find some of these tables to play in real life so this brings back memories. I di find a bug in that the I in BUSHIDO do not light when you roll over it, it still flashes.

You need to login in order to like this post: click here

1 user thanked author for this post.

Goldchicco

[bha19]

J4miePlayer wrote:

bha19 wrote:

I now think the gate is mapped backward. I was able to hit the spot target for open gate and it closed the gate.

Hi bha19, yep just swap the “if then else” for the gate around and it works as expected

Thanks, I think that worked. I swapped line 72 and 73 with lines 75 and 76

You need to login in order to like this post: click here

[bha19]

I now think the gate is mapped backward. I was able to hit the spot target for open gate and it closed the gate.

You need to login in order to like this post: click here

[bha19]

Great table and thanks for the bug fixes. Anybody figure out the right gate. It does not close, but it seems that the arrow light does go out. Should not the gate be closed at the start of the ball? It seems it is only closed and the end of a game.

You need to login in order to like this post: click here

[bha19]

Great table. One question is how do I turn off the DMD since the backglass already shows everything? I tried

Controller.ShowTitle=0
Controller.ShowFrame=0
Controller.ShowDMDOnly=0
Controller.Hidden = 0

You need to login in order to like this post: click here

[bha19]

Thanks for the update

You need to login in order to like this post: click here

1 user thanked author for this post.

Goldchicco

[bha19]

2 questions about the table:

 

1: Neither the inlane or outlane drain  is this correct?

2: If you don’t score a basket do the flippers go dead and you lose your ball cause this happened to me.

You need to login in order to like this post: click here

[bha19]

I got a replay  and on the same ball I got another replay  through the upper loop both times. and then the table crashed with the error. I am Not sure about multi ball but could have been.

You need to login in order to like this post: click here

[bha19]

Error line 923 subscript out of range

You need to login in order to like this post: click here

[bha19]

Thanks for the wonderful table. I do have a PinUp question for tables. I am on a desktop with 2 monitors, one above the other. How do I move the backglass to the second monitor so it is not blocking part of the table? This happened on another table (Munsters) and that backglass would not move either.

 

You need to login in order to like this post: click here

[Author]

Posts