Currently, there are 0 users and 0 guests visiting this topic.
Viewing 20 posts - 41 through 60 (of 94 total)
  • Author
    Posts
  • #160372
    Thalamus
    Moderator
    @thalamus
    ContributorMemberModerator

    I’ve played this table for over an hour and I’ve yet to see severe issues. I did a very minor tweak on the left flipper. Trap balls on it and they start to shake. You can crate a very small round wall in between the wire and the flipper or I expect you can also extend the wire just a fraction. I’m really impressed with the casino animation. And, I’m enjoying the table a lot. The hi-lo shot is hard, and returns from that area is dangerous. Love it.

    #160373
    bord
    Moderator
    @bord
    MembervipContributorModerator

    I agree with @thalamus. Physics on this feel really, really, really great. Also: really great.

    #160374
    STAT
    Participant
    @stefanaustria
    MemberContributor

    So, i also did a few Games now, i feel like i was in a Casino, and lost all my Money ( as always ;-) )
    I didn’t check all the Mod’s and Things, just was surprised by the Roulette Wheel :-) Amazing … :good:

    Thanks Guys :rose:   … thanks again also Wildman !

    IMG_20200124_205446

    #160376
    Rik L
    Participant
    @cynsin

    I fixed it with r4901

    #160381
    CarnyPriest
    Participant
    @carnypriest
    Member

    For HRC, you must use the 3.3 VPinMAME beta, r4895 or greater. V3.2 does not have support for the 4 solenoid stepper motor mech. Of course, this is mentioned in the installation notes. B-)

    1 user thanked author for this post.
    #160382
    Rik L
    Participant
    @cynsin

    I did grab 3.3 originally. It says it was the latest but it wasn’t so I researched and found it.

    #160384
    CarnyPriest
    Participant
    @carnypriest
    Member

    This is the place that has the latest beta build:

    http://vpuniverse.com/forums/topic/4278-sambuild33-beta-thread/

    #160385
    Rik L
    Participant
    @cynsin

    Yah that’s where I went. It’s all good.

    #160400
    Thalamus
    Moderator
    @thalamus
    ContributorMemberModerator

    @carnypriest : while we’re on the subject. Thanks you so much for keeping up with pinmame. Taking over for Arngrim year back, and seeing to that new roms are sent to the devs, compiling and making it easy for everyone else to keep up with the latest and greatest. You even did it for years without having a vpin that was working. Tells a lot about who you are as a person in my opinion. :rose:

    #160403
    PEandS1Ws
    Participant
    @peands1ws

    Thank you to everyone involved!

    Every week we get another great VPX table. Such a great time to be a pinball fan.

    This one required some legwork. Updated VpinMAME and had to change line 100 to False to get the DMD to display in my 2 screen cabinet.

    Always worried when I have to update something in the pincab….that’s right Windows 10 I’m talking about you!

    1 user thanked author for this post.
    #160413
    CarnyPriest
    Participant
    @carnypriest
    Member

    @carnypriest : while we’re on the subject. Thanks you so much for keeping up with pinmame. Taking over for Arngrim year back, and seeing to that new roms are sent to the devs, compiling and making it easy for everyone else to keep up with the latest and greatest. You even did it for years without having a vpin that was working. Tells a lot about who you are as a person in my opinion. :rose:

    PinMAMEdev gets all of the credit. I just post stuff now and then.

    #160424
    htamas
    Participant
    @htamas
    Member

    had to change line 100 to False to get the DMD to display in my 2 screen cabinet.

    Thanks for this… I was wondering why the DMD doesn’t show up, and this fixed it.
    Wasn’t really intuitive why would I have to set this line to “False” though…

    Dim UseVPMDMD:UseVPMDMD = False

    You’d think this is what makes the DMD to disappear… apparently not.

    #160425
    ramsrule
    Participant
    @ramsrule

    Hey guys…. great table.  Looks spectacular and plays like a dream.  Kudos to everyone who put in the time and effort into the project.  I can stare at the roulette wheel and easily lose track of what I’m doing – it looks so good its a distraction.  LOL :yahoo:

    But…. I did notice after several games that I too am not getting any spins from the slot machine, nor any ramp action.  Any ideas as to what could possibly be the issue?  I did upgrade my PinMame to 3.3 per the instructions.

    Thanks for any help in advance :good:

    #160427
    DJRobX
    Moderator
    @djrobx
    MemberModerator

    In my case, the ramp does not rise from the slot machine. What could that be?

    You need to update vpinmame to the latest sambuild.  You have 3.3 but not the newest that has the new solenoid implementation.

    2 users thanked author for this post.
    #160430
    zimbakin
    Participant
    @zimbakin
    Member

    Work of art… brilliant man!

    #160433
    Kabs
    Participant
    @kabs

    i am getting spins from slot machine but then the ball is stuck and lost ball = restart game

    #160434
    DJRobX
    Moderator
    @djrobx
    MemberModerator

    Is doesn’t start unless you do. So yes

    Sort of. In the script I check the vpinmame version of 3.3.  But VPiname does not report back the SVN revision, so it doesn’t know if you really have the needed version or not .

     

    #160435
    DJRobX
    Moderator
    @djrobx
    MemberModerator

    i am getting spins from slot machine but then the ball is stuck and lost ball = restart g

    You may have the same problem – the old 3.3 beta without the support for moving the ramp.   If the ramp doesn’t move it may not be able to let go of the ball.

    1 user thanked author for this post.
    #160436
    Kabs
    Participant
    @kabs

    thanks Rob, just install sambuild -4901 and it appears to be working well and didnt screw up GB which is why i was still running older version.

    #160438
    BeachBumTN
    Participant
    @beachbumtn
    Member

    Excellent work from all involved. I downloaded it tonight and found myself in a “just one more game” loop most of the evening!  Definitely one of my favorites – thank you!

Viewing 20 posts - 41 through 60 (of 94 total)
  • You must be logged in to reply to this topic.

©2020 VPinBall.com

Log in with your credentials

or    

Forgot your details?

Create Account

The Vpinball app

FREE
VIEW