Currently, there are 0 users and 0 guests visiting this topic.
Viewing 20 posts - 61 through 80 (of 97 total)
  • Author
    Posts
  • #175406
    Dark
    Moderator
    @dark
    vipMemberContributor

    @rooster appreciate you, thanks.

    Some plastics need text, there’s also alternate text for some plastics I wanted to reproduce.

    3dcreation

    #175409
    randr
    Keymaster
    @randr
    ModeratorMember

    Table is really starting looking great guys! Slowing getting everything scripted and “working”

    ********************************************************
    Messing with the VPinball app and push notifications.
    So if you haven't downloaded app yet what are you waiting for!?
    for IOS and Android

    ********************************************************

    #175424
    Onevox
    Participant
    @rooster
    Member

    @dark I’ll work on the plastics whenever they’re ready.

    Onevox

     

    #175459
    Dark
    Moderator
    @dark
    vipMemberContributor

    @cyberpez

    A few additional plastic pics attached.

     

     

    3dcreation

    Attachments:
    #176029
    Dark
    Moderator
    @dark
    vipMemberContributor

    @cyberpez

    Mind reporting your progress on plastics?  I’d like to start on some and don’t want to do same ones as you.

    3dcreation

    #176033
    cyberpez
    Participant
    @cyberpez
    Member

    @Dark. Honestly still the same one.  The way I’m doing it is going slow.  I’ll forsure finish this one up, and I can finish up the original I started too.

     

    The plastics you posted earlier were a great help!  Thanks!  Answered so many questions!

    #176035
    Dark
    Moderator
    @dark
    vipMemberContributor

    No problem, I’m going to start on the large one with the bowlers cap referee soon.  I got most of the backbox scoreboard done.

    3dcreation

    #176106
    Dark
    Moderator
    @dark
    vipMemberContributor

    mhxiw6qw4wdd10hc2lxeq46x6zakqkt3



    @rooster
    there are alternative text (below) for this plastic (above).

    12000204

    120011001

    fab54e4d8eb801fa460a215af766f5d97066c7ec

    Imgoingto-cropped

     

    The ‘Al Bushy for president’ is the lowest priority one.  The table owner wants the “Game company of the future’ version.  I’d like to include all of them with texture swap options for the vp table.

     

    3dcreation

    #176212
    Onevox
    Participant
    @rooster
    Member

    Ok. I’m guessing that the script font for “Jerry’s” is the Brush Script you could get from Letraset.

    Screen Shot 2020-04-28 at 2.24.21 PM

     

     

    Onevox

     

    1 user thanked author for this post.
    #176217
    Dark
    Moderator
    @dark
    vipMemberContributor

    Yea sadly that’s the only pic I have of that version of the plastic.

    3dcreation

    #176222
    Onevox
    Participant
    @rooster
    Member

    @dark  Clarity. Am I waiting on recolored plastic to do final, or just add type layers to these and you’ll swap. Or something else?

    Onevox

     

    #176247
    Dark
    Moderator
    @dark
    vipMemberContributor

    @rooster if you have positioning finalized you can send me rasterized layer.

    3dcreation

    #176279
    Onevox
    Participant
    @rooster
    Member

    @dark. here you go. i did the color and black out of curiosity. you can ignore.

     

    https://drive.google.com/open?id=131dpDRamY2EgZ_S5NxCVFuMgqCgdoDsn

    Onevox

     

    1 user thanked author for this post.
    #176290
    Dark
    Moderator
    @dark
    vipMemberContributor

    @rooster

    Thanks Pete, looks great, appreciate the extra work so don’t worry about it going to waste.

    Just so people don’t think I’m just delegating everything I have been keeping busy :P

    FlipperWIP

    3dcreation

    #176310
    bord
    Moderator
    @bord
    MembervipContributorModerator

    Sick, @dark. Those are sweet! Are you going to keep the geometry or use a normal map? My success with normal maps on flippers has been nominal at best, although I just finished some metal etched 2″ flippers that look alright.

    #176317
    Dark
    Moderator
    @dark
    vipMemberContributor

    Sick, @dark. Those are sweet! Are you going to keep the geometry or use a normal map? My success with normal maps on flippers has been nominal at best, although I just finished some metal etched 2″ flippers that look alright.

    Honestly I was just debating what I want to do for this, part of me just wants to be lazy and use the high poly flippers with all the letters and stuff modeled in since this table is relatively cheap on resources with no wire forms or plastic ramps.

    3dcreation

    #176322
    randr
    Keymaster
    @randr
    ModeratorMember

    @dark give me those! Man they look great :)

    ********************************************************
    Messing with the VPinball app and push notifications.
    So if you haven't downloaded app yet what are you waiting for!?
    for IOS and Android

    ********************************************************

    #176502
    Dark
    Moderator
    @dark
    vipMemberContributor

    Sick, @dark. Those are sweet! Are you going to keep the geometry or use a normal map? My success with normal maps on flippers has been nominal at best, although I just finished some metal etched 2″ flippers that look alright.

    I ended up just making the top of the flipper with the text just a texture map, I also baked a normal map for it which looked fine in max and looks fine in vp initially but soon as you flip the flipper it causes issues, likely the tangent map normal issue in VPX.  I still have to finalize the flippers but we have them mostly working in vpx with the wire animating as balls go under it but it still needs some fine tuning…..the thing is tricky.

    In other news I’m going hard on restoring the plastics now and expect to begin building the table in 3D this weekend.

     



    @cyberpez
      How are you making out on that plastic?  Would it be reasonable to have it completed by the weekend?

    3dcreation

    #176504
    cyberpez
    Participant
    @cyberpez
    Member

    I’m this far..  maybe 2/3 through the black…  then I’ll finish up the white halftone areas and then the rest of the colors…  I hope to finish the black today and might get the rest done tomorrow.

     

    PlasticTest2

    1 user thanked author for this post.
    #176514
    randr
    Keymaster
    @randr
    ModeratorMember

    @cyberpez :good:

    ********************************************************
    Messing with the VPinball app and push notifications.
    So if you haven't downloaded app yet what are you waiting for!?
    for IOS and Android

    ********************************************************

    1 user thanked author for this post.
Viewing 20 posts - 61 through 80 (of 97 total)
  • You must be logged in to reply to this topic.

©2020 VPinBall.com

Log in with your credentials

or    

Forgot your details?

Create Account

The Vpinball app

FREE
VIEW