Forum Replies Created
-
Posts
-
I installed 10.5 this year. I have not updated it recently in the last 4 months or so. Doing the research on the 32 bit patch. Will that help performance on other tables.
Tried deselecting full screen and same results, no error
You need to login in order to like this post: click here
I am using a 32 bit system with windows 10. That’s a shame, I have 350 other tables working I was hoping this one would be able to run also.
You need to login in order to like this post: click here
Crash report VPX rev3427
============
Process: VPinballX.exe
Reason: 0xE06D7363 – UNKNOWN at 001B:7478CAB2
Thread ID: 0xA60 [2656]Call stack
==========
(0xFFFFFFFFE06D7363 0x00000001 0x00000003 0x0014a240)
(0x0014A25C 0x00687B30 0x0055F1BC 0x0055f1c4)
(0x0012C000 0x0826BAC4 0x00480FF3 0x0012c000)
(0x0012C000 0x77DE4210 0x1C440CA8 0x0014f468)
(0x00521E25 0x0014F4B0 0x77DE4210 0x00000000)
(0x0014F4B0 0x77DE4210 0x00000000 0x005220c1)
(0x4D8B1A75 0x24468D0C 0x6765E850 0x01b8fff6)
(0xFFFFFFFFACE8500C 0xFFFFFFFFB8FFF666 0x00000001 0xffffffff8b5b5e5f)
(0x08418B08 0xFFFFFFFF8B0C4689 0x46890C41 0x08468b10)
(0x08468B10 0xFFFFFFFF8914498B 0xFFFFFFFF8510244C 0xffffffff8b3c7ec0)
(0xFFFFFFFF8914498B 0xFFFFFFFF8510244C 0xFFFFFFFF8B3C7EC0 0x798d0456)
(0xFFFFFFFF8510244C 0xFFFFFFFF8B3C7EC0 0x798D0456 0x24448b03)
(0xFFFFFFFF8B3C7EC0 0x798D0456 0x24448B03 0xffffffff85c93314)
(0x798D0456 0x24448B03 0xFFFFFFFF85C93314 0xffffffff8b1d7ed2)
(0x24448B03 0xFFFFFFFF85C93314 0xFFFFFFFF8B1D7ED2 0x009b8dc7)
(0xFFFFFFFF85C93314 0xFFFFFFFF8B1D7ED2 0x009B8DC7 0xffffffff80000000)
(0xFFFFFFFF8B1D7ED2 0x009B8DC7 0xFFFFFFFF80000000 0xffffffff850f0038)
(0x009B8DC7 0xFFFFFFFF80000000 0xFFFFFFFF850F0038 0xfffffffffffffedb)
(0xFFFFFFFF80000000 0xFFFFFFFF850F0038 0xFFFFFFFFFFFFFEDB 0x04c08341)
(0xFFFFFFFF850F0038 0xFFFFFFFFFFFFFEDB 0x04C08341 0xffffffffef7cca3b)
(0xFFFFFFFFFFFFFEDB 0x04C08341 0xFFFFFFFFEF7CCA3B 0x1424448b)
(0x04C08341 0xFFFFFFFFEF7CCA3B 0x1424448B 0x3bf80343)
(0xFFFFFFFFEF7CCA3B 0x1424448B 0x3BF80343 0xffffffffd57c085e)
(0x1424448B 0x3BF80343 0xFFFFFFFFD57C085E 0xffffffff8b08468b)
(0x3BF80343 0xFFFFFFFFD57C085E 0xFFFFFFFF8B08468B 0x3310244c)
(0xFFFFFFFFD57C085E 0xFFFFFFFF8B08468B 0x3310244C 0x0fc085d2)
(0xFFFFFFFF8B08468B 0x3310244C 0x0FC085D2 0xfffffffffffeb68e)
(0x3310244C 0x0FC085D2 0xFFFFFFFFFFFEB68E 0x03798dff)
(0x0FC085D2 0xFFFFFFFFFFFEB68E 0x03798DFF 0x4639c033)
(0xFFFFFFFFFFFEB68E 0x03798DFF 0x4639C033 0xffffffff8b147e04)
(0x03798DFF 0x4639C033 0xFFFFFFFF8B147E04 0x009b8dcf)
(0x4639C033 0xFFFFFFFF8B147E04 0x009B8DCF 0xffffffffc6000000)
(0xFFFFFFFF8B147E04 0x009B8DCF 0xFFFFFFFFC6000000 0x498dff01 (0 (0x20468900 0xFFFFFFFFCCCCA3EB 0x56CCCCCC 0xf
Environment
===========
Date/time: 28/10/2018, 19:43:12:287
Number of CPUs: 4
Processor type: 586
System: Unknown Windows version – 6.2 ()Memory status
=============
Total Reserved: 96920K (94M) bytes
Total Commited: 1933064K (1887M) bytes
Total Free: 67104K (65M) bytes
Largest Free: 1076K (1M) bytesRegisters
=========
EAX=0014A1B0 EBX=00000000 ECX=00000003 EDX=00000000
ESI=00687B30 EDI=0014A25C EBP=C7000014 ESP=00522101 EIP=00144C87
FLG=00000212 CS=001B DS=0023 SS=0023 ES=0023 FS=003B GS=0000Failed to save minidump.
You need to login in order to like this post: click here
2 users thanked author for this post.
tried the new one and same. if I use the original version it works. I am happy with the other one. thanks for the work
You need to login in order to like this post: click here
so excited about this one growing up in the 80s. unfortunately same proglem as gi joe. I put the music in the music folder and the table in the table folder. I launch the table and vpx starts to load and then just shuts off. the blue loading bar gets almost all the way full and then vpx disappears
You need to login in order to like this post: click here
installed the table with the 170hc rom and it worked the first time I played it. after that rom error. I deleted everything even in the registry and installed with the 170h rom. played fine the first time. closed it and loaded it again same way by launching table directly and rom error, cant find rom.
I have an older version with the 164 rom and ok so far…
You need to login in order to like this post: click here
table crashes for me before it even opens with no error messages
You need to login in order to like this post: click here
didn’t have any score show on the new b2s. went back to old one and it shows up
You need to login in order to like this post: click here
how do you get the score off the playfield . is it movable
You need to login in order to like this post: click here
Great looking table. Haven’t played it yet but will first thing tonight. A b2s would be great or even a static image for front end from the same graphics. Thanks
You need to login in order to like this post: click here
I understand how to move and resize a normal dmd and even using external dll. this game doesn’t have a normal dmd so when I turn on the external it always shows up at the bottom of my playfield and after I move and resize it, it goes back to pf on next game. any thoughts
You need to login in order to like this post: click here
fixed my issue , table plays great with this pack.. used to have lots of stutter and now its all gone. thanks
You need to login in order to like this post: click here
great job thanks. this would make for a great PUP project!
You need to login in order to like this post: click here
amazing job. this along with the PUP pack for backglass is truly awesome
You need to login in order to like this post: click here
when I go to the rom and enable the external dmd and disable the other my solenoids all lock up. I have to restart my computer to unlock them. I did this for 24 and it worked after reboot but then it stopped during play in pinballx and got this in the log :<span style=”color: #ff0000;”>ffmpeg.exe not found in application folder: C:\PinballX</span>
You need to login in order to like this post: click here
those lines are not commented out.
You need to login in order to like this post: click here
yes sir, within the month. everything works but dof. is there a setting in the script that needs changed
You need to login in order to like this post: click here
not getting dof, any suggestions
You need to login in order to like this post: click here
Thanks
You need to login in order to like this post: click here
Yes I tried that. Tried different rom. This is 1 or almost 400 tables that does not work. And it did work before
You need to login in order to like this post: click here
