Forum Replies Created
-
AuthorPosts
-
Hello,
there seems to be only the 4×3-version available…
Thanks
pinkingYou need to login in order to like this post: click here
Really like this table, very great!
I was a little bit shocked with the new version (fun/pro), because i tried fun-mode first. I don’t like this blinky-blinky-stuff and too much light on the tables, but everything was good again after playing the pro mode.
Had the same error as Peter222 that the last ball after mutiball was not recognized after it drained. The pinball was still alive, but I had no chance to complete the game (what a shame, was at 16 million points).
The last two balls ran very close after another down the drain.Best wishes
pinkingYou need to login in order to like this post: click here
ok, it works with signin, but that is only the second best way ;-))
You need to login in order to like this post: click here
1 user thanked author for this post.
@marty: It is a little bit different from that what you wrote:
If a file is downloaded too often from google google itself denies the download! This is independent of user and ip-adress!
This happens very often with huge pup-packs and so on. There are various possible solutions, the one you mentioned is to wait until googles cancels the restriction of the file. Some other uploaders use different providers so that more people can download the files(s). I saw rather often mega.nz as an alternative to google, because it is free, fast and easy to use without accounts for the downloaders.pinking
You need to login in order to like this post: click here
Hello,
is there another download-option?
Google says download limit exceeded, file downloaded too often.
Thanks
pinking
You need to login in order to like this post: click here
excatly, nothing in this .zip-file.
Same on vp***ums.You need to login in order to like this post: click here
Mega link works fine, just click on the topr ight corner “Download as Zip”
Make sure AdBlock or any antivirus is not blocking it
See picture attached.
PS forgot to mention: don’t use Microsoft Edge or Internet Explorer, use instead Chrome or Firefox
Yes, would like to do that
Now it works, don’t know what was the reason. The screen with the files did not come up and so I had no chance to click the “zip”-button. Using firefox.
Everything good now, thanks
Pinking
You need to login in order to like this post: click here
1 user thanked author for this post.
Hi,
nice transfer to VPX, but the mega-link doesn’t work. Permant message “decrypting folder” but nothing happens. Usually mega works without issues…
Thanks
pinkingYou need to login in order to like this post: click here
Hello,
really like this table, but will there be some progress in the future. From my point of view there are still missing a lot of things.
I don’t want to critisize anyone, It is al lot of work to achieve this result! Just want to know if there is still something planned in the future.Thanks and best wishes
pinkingYou need to login in order to like this post: click here
Hello,
really great table, a real pleasure to play, only some small findings:
@bushav: here no issues with 3 screen-setup with lcd-dmd, eveything good. Within pinballx and without.- after getting mutliplier 2* there is the possibilty to get 3* with hitting the correct ramp. After doing this comment says 3* mutliplier is activated but at the end bonus is not multiplied, it is set back to 1*. I can’t remeber one single ball/game where i got more than 2* multiplier.
- Yondu-mission doesn’t finish correctly. Sometimes the couter even goes to -1 or -2 but mission is not counted as completed.
- On the original table you can switch with the flipper-buttons through the menu during attract mode. For example you can scroll through the high-scores (left=back, right=forward) and credits. Would be a nice feature.
But over all a really godd playable table!
Thanks
pinkingYou need to login in order to like this post: click here
Hi, really great table, i love it!
The last two versions (3.3.5 and 3.3.6) had no update in the zip-file.
The included tables are both dated 17.06.2020 but should be 17.08.2020. The content of the file is the same as the old version. Perhaps something wrong during upload? Or is it only me with this issue?
The non-AI-version files were always up to date…UPDATE: Seems to be fixed now…
Thanx
pinking
You need to login in order to like this post: click here
1 user thanked author for this post.
Looks really great, can’t wait to test.
This will be a very long weekend with very few sleep…Thanks to all involved
pinking
You need to login in order to like this post: click here
Hello arconovum,
you sure make great tables, but one small suggestion:
I don’t know if it is only with this table or with some others, too. After running this table and exiting correcty, this table keeps the flag “disable b2s”. I just wanted to try this table and after that i got a small heartattack
, because all other tables in the cab did no longer start their b2s. It took a quite long time to find the reason (restore, test everything again etc.) and I am not alone with this issue.
So back to my suggestion: please set the flag back to “enable b2s” when exiting your table(s).
Thanks and stay healthy
Pinking
You need to login in order to like this post: click here
randr: Sorry, did not see it. Seems I need new eyes
Thanks for answering so fast..
Pinking
You need to login in order to like this post: click here
Hello,
really great table, i love it!
For me it is at least as good as the St*rn version of Iron Maiden (Real Pin), i think this VP is even better.
Turn the volume up to the max and play this table.As mentioned above there is something wrong in the b2s-display.
And there is some issue after entereing the initials for highscore. After entering third digit the process is not stopped, you have to wait until the countdown is to zero. Perhaps you know what to do ;-))greetings
pinking
You need to login in order to like this post: click here
1 user thanked author for this post.
Hello NailBuster,
thanks, for clarifying this.
I will try it over the weekend.
Thanks
pinking
You need to login in order to like this post: click here
Hi Scotty,
Thanks for your answer.
Yes, this could be a solution, but i need teh DMD for other tables.
And, if there is a switch/variable in the script to disable the DMD, this switch should work properly.
Or am completely wrong?Thanks
pinking
You need to login in order to like this post: click here
Hello,
with version .52 the pupDMD-video is still running even if i disable it in the script.
In attract mode no video is running, but after starting the game the video on the DMD is running.
Need a solution to disable the pupDMD-dispay at all.btw: very nice table
pinking
You need to login in order to like this post: click here
-
AuthorPosts