This topic contains 169 replies, has 79 voices, and was last updated by  outhere 2 months, 1 week ago.

Viewing 20 posts - 61 through 80 (of 170 total)
  • Author
    Posts
  • #109552
     outhere 
    Participant
    MemberContributor

    See thalamus Post for rom

    So is there supposed to be a new rom that I need to put into the rom folder? I downloaded the latest 3.2 beta. It’s not included in that download. I’m also getting a bass dll error every time a ball drains. The table plays fine during the ball play and plays ok again after I close out the error page. I did replace the bass.dll that was in the new beta. Thanks again

    #109564
     rx2006je 
    Participant

    I am getting this error when i try and load the tableUntitled1any help would be appreciated.  I changed the rom name like the instructions said, it first said rom not found needed hlywoodh so i put that rom in and got the error pictured.

     

    i got it fixed. I was using my desktop computer to test it before putting in my cabinet and the crappy graphics card wouldn’t run it. I lowered the max texture dimension in the video options and presto. it worked.

    #109566
     Bob Albright 
    Participant
    Member

    When I click on Thalamus link for the rom I get

     

    We  could not locate the item you are trying to view.

    #109569
     outhere 
    Participant
    MemberContributor

    That’s weird, as it works fine for me

    When I click on Thalamus link for the rom I get

    We could not locate the item you are trying to view.

    #109570
     CarnyPriest 
    Participant
    Member

    I thought the author included the rom with the table download. Just need to rename the zip to tomjerry.zip.

    1 user thanked author for this post.
    #109573
     Thalamus 
    Moderator
    ContributorMemberModerator

    Did you release 4683 Carny ? To me it looks like that is the required version for using tomjerry.zip ?

    1 user thanked author for this post.
    #109583
     CarnyPriest 
    Participant
    Member

    No, not yet. Maybe later tonight.

    In the meantime, use the official beta or it would probably work to use SAMBuild and name the set hlywoodh.zip and enable “Ignore ROM CRC errors”.

     

    1 user thanked author for this post.
    #109629
     blackvulcan3 
    Participant
    Member

    This may be the same as Thalamus, I get no errors, but I also get no DMD display. I am using the 3 screen DMD backglass version. I use an LCD display on freezy’s 1.71 for DMD.

    Otherwise table plays fine. Looks great too.

     

     

     

     

    1 user thanked author for this post.
    #109652
     Bob Albright 
    Participant
    Member

    Just thought I would report that I got my issue resolved (where I was getting the bass dll error after every drained ball). All 4 of my music files were installed, but I reinstalled them overwriting the originals, and now the issue has gone away. And I agree with the others who posted that this is one of the best originals out there. Thank you

    1 user thanked author for this post.
    #109681
     Scooby 
    Participant
    Member

    Absolutely fantastic table and a fun theme! Is there DOF for this table? Would make it a must play on the cab if/when there is DOF.

    Thanks again!

    1 user thanked author for this post.
    #109682
     KiwiBri 
    Participant
    Member

    Amazing game, I thought it actually was based on a *real* game “Tom & Jerry” – wow.  Thank you for sharing.

    So, I have one issue, when it asks for “Enter your Initials” the left/right flippers don’t seem to work… Did I miss something?

     

    thanks!

    1 user thanked author for this post.
    #109683
     Watacaractr 
    Participant

    Hello Scooby. Tom and Jerry has been added to the DOF configtool list. :)

    #109693
     Scooby 
    Participant
    Member

    Thanks Watacaractr, I see it now. It looks like all of the values such as flippers, slings and bumpers are not yet populated in the config tool. I wish I had the skills to create DOF with the manuals and such. Do you have any plans to populate those values in the tool? Maybe team up with Arngrim?

    1 user thanked author for this post.
    #109695
     outhere 
    Participant
    MemberContributor

    Watch this video First

    http://vpuniverse.com/forums/topic/3853-dof-config-tool-a-video-tour-of-its-many-features-and-mysteries/?tab=comments#comment-42000

    Scooby open up 2 DOF (WebSite) windows, on one have Hollywood heat and On the other have Tom-and-jerry..

    On the right side of Hollywood heat copy the entire line then on Tom-and-jerry on the right side pasted it in the same line

    When you are done or As you go along, at the bottom Of the page on Tom-and-jerry it says save changes…

    When you are done (Click save changes) and then click generate config, they will be the new files for your DOF

     

    2 users thanked author for this post.
    #109706
     sirknockie 
    Participant

    What a great Table.

    Plays so good !

    Thank you very much !!

     

    1 user thanked author for this post.
    #109775
     Arngrim 
    Participant
    DOF MinisterMember

    Dof config is available now :)

    You will need the new version of the table that is not uploaded yet, to benefit from all thr force feedback ;)

    7 users thanked author for this post.
    #109796
     rothbauerw 
    Participant
    ContributorMembervip

    Dof config is available now :)

    You will need the new version of the table that is not uploaded yet, to benefit from all thr force feedback ;)

    I don’t see the updated config in the config tool.  I’m assuming it’s under the “Tom and Jerry” table?

    Current Project: Perpetual updates of Pinball Magic

    #109797
     Scooby 
    Participant
    Member

    Scooby open up 2 DOF (WebSite) windows, on one have Hollywood heat and On the other have Tom-and-jerry..
    On the right side of Hollywood heat copy the entire line then on Tom-and-jerry on the right side pasted it in the same line
    When you are done or As you go along, at the bottom Of the page on Tom-and-jerry it says save changes…
    When you are done (Click save changes) and then click generate config, they will be the new files for your DOF

    Thanks for this! I guess this was an easy one for copy and paste since it uses the hollywood heat rom and that table has DOF already done to it. I now have DOF working for this table and man, is it fun!

    Thanks again to outhere for the help and Watacaractr for this super fun table.

    1 user thanked author for this post.
    #109798
     randr 
    Keymaster
    ModeratorMember

    Thanks @arngrim

    ********************************************************
    Messing with the VPinball app and push notifications.
    So if you haven't downloaded app yet what are you waiting for!?
    *******************************************************

    #109979
     PinballerinID 
    Participant

    Hello, I downloaded the new DOF version with the new ROM tomjerry.zip and have it placed in my ROM directory, on launch of the table I am getting Line 43:  Game name not found.  I have verified that cGameName in line 4 is tomjerry.

     

    Any hints?

    Thanks!

Viewing 20 posts - 61 through 80 (of 170 total)

You must be logged in to reply to this topic.

©2019 VPinBall.com

WP2FB Auto Publish Powered By : XYZScripts.com
Vpinball.com

Log in with your credentials

or    

Forgot your details?

Create Account