Forum Replies Created
-
Posts
-
thanks !
You need to login in order to like this post: click here
Thank You !
You need to login in order to like this post: click here
Equalizer APO installed ? Had similar issues until this was installed, plus disabling center channel speaker in windows setup.
You need to login in order to like this post: click here
Awesome table ! Thanks !
You need to login in order to like this post: click here
Just wanted to update, I did get my sounds for Bally tables to work again , by downloading the Sound Samples here https://vpinball.com/VPBdownloads/sound-samples/ , don’t really know why it worked, as it was the same size file and name I had in there already(from vpforums) , maybe it was just because it was Tuesday ??
Thanks
You need to login in order to like this post: click here
1 user thanked author for this post.
Thanks Tom, no rush enjoy the holiday weekend I’ll see if outhere wants to stop over for a beer and pick his brain.
You need to login in order to like this post: click here
Thanks for the response Tom,pressing 7 makes the scores disappear with the backglass flashing, then if I Press 9 the flashing stops , i have to exit and restart to see if there was a change as it seems to not want to restart. I have also deleted the nvram and cfg. In the troubleshooting process. Key 7 flashing backglass press 7 again continually counts up 0000000 to 9999999 in the player slots, press 7 again counts up 01to 12 with some table diagnostics going on , pressing 7 again player slots go blank, pressing 8 nothing seems to happen, pressing 9 it stops counting but resets unless pressed multiple times. Thanks
You need to login in order to like this post: click here
Great table, thank you.
Is there a way to turn up the volume for scoring sounds as i am producing none for this table.
Thanks
You need to login in order to like this post: click here
Awesome !!
You need to login in order to like this post: click here
Thanks Thalamus, Randr, and Outhere for chimming in – i have set the max intensity all the way down to 4 which lessens the intensity until the crazy one takes off, it just seems like a timer issue where it is letting it run to long and also a higher intensity than intended. Since I know myself and outhere have the same setup for this, maybe the answer lies somewhere here. Randr would you be so kind as to share your Shaker brand and controller – basically your general setup for this. Maybe that could point us in the right direction, since yours doesn’t have seizures when you play. Thanks again fellas much appreciated !!
You need to login in order to like this post: click here
So the vanish magnet runs the shaker .? I couldn’t find a shaker in the manual. Thanks for trouble shooting – must be missing something simple – what would make it be so random.
You need to login in order to like this post: click here
https://vpinball.com/VPBdownloads/tales-of-the-arabian-nights-skitso-detail-mod/
You need to login in order to like this post: click here
Ok got it :) …. Hold both flippers down while table is loading ………….. the other one is if you hold left flipper while loading it will load to desktop view.
You need to login in order to like this post: click here
Sounds like that might be what happened, but dam if I could only recreate it : )
You need to login in order to like this post: click here
Got it — notice the plunger is on the left, all ramps are reversed as well as all the words !
You need to login in order to like this post: click here
Wow this table is something special, thanks to all involved you knocked it out of the PARK ! Came across this- see attached photo – (after playing a few rounds – upside down reversed -which played well) and restarting the table came back to normal. Dont really know how I got the table to do this ? edit: Having a bit of a problem uploading pic ?
You need to login in order to like this post: click here
Awesome !
You need to login in order to like this post: click here
Cant get this bad boy to accept quarters ? Thanks for the table !!!
You need to login in order to like this post: click here
Thanks Thalamas, just for kicks I changed the switch shape to triggerwireA and it played very well hitting from all angles. Would there be anything different from the star switch?
You need to login in order to like this post: click here
Thanks for the great table , one of my favorites. Quick observation the rollovers (10 stars) appear to have a hard time activating when hit head on , but from the sides or the ball rolling from top to bottom seems to activate them more consistently. Was just curious if anyone can confirm if there is a particular way to go about getting a strike.
You need to login in order to like this post: click here
