Forum Replies Created
-
Posts
-
Weird, I’m not getting rom sounds on this one. I get the bumper sounds and target sounds and gate sounds but no electronic sounds like from the rom. Could it be the rom. I got it from the other site. Is this the correct rom or should I look somewhere else. Nice table by the way!!
You need to login in order to like this post: click here
Like some others, I have a Pinball Missing issue. I deleted the nvram but to no avail. Interestingly my VP9 version works well.
I’m sure the answer is under my nose, but I can’t seem to solve it. Any ideas?
I just put out an update with a change to the trough area to try to solve this issue. Also has updated sounds from @Thalamus.
-Mike
I’m still having my pinball missing issue. I need to check out the update. Was experimenting trying to figure this out. Interestingly, If you go and test the Vpinmame, using the Vpinmame test under the Vpinmame setup menu, the table does the missing pinball issue. Now if you go and play the VP9, it plays no error. I know what I’m saying is impossible, but its true. I’m using windows 7 on the cab, Once you get it to start working and don’t close it out, it plays fine with multiple games. Putting it on my windows 10 computer, i still get the error but the table plays and doesn’t error. So that’s my feedback, now to check out that update….
You need to login in order to like this post: click here
Solved my problems using the roccodimarco script above. Plays like a champ now!! Just letting you guys know in case you get this problem how to solve it.
You need to login in order to like this post: click here
I seem to be getting a pinball missing error. Table can’t start. Thought maybe it was the rom but there is only one rom so I don’t know. I have been able to play a couple games but this seems to be a pita. Nice table though. I guess I’m going to try to put a fresh copy on my system wish me luck!!
Well I put on a free copy deleted the nvram and I still get nada. So wth???
You need to login in order to like this post: click here
Can this be added as a pup pack for the future pinball table. I have yet to learn how to use pup packs outside of visual pinball. They seem to not appear on the pup pack rom generated listing. Having a hard time with Aliens FX3.
You need to login in order to like this post: click here
Can anyone explain how to patch a vpx table this patcher seems to only patch vpt’s. I cant seem to make it patch. It only pulls up vpt files. Been trying for weeks.
You need to login in order to like this post: click here
Maybe I need to change my launch button key. That might be the problem.For those that this is working what key are you using for the ball plunger?
You need to login in order to like this post: click here
I don’t know the right and left magnasaves dont work and neither does the plunger key. Its a mystery to me what operates the crossbow.
You need to login in order to like this post: click here
When I try to put a background on the table, the sides become transparent, same with the top/back of the table. Plus the table crashes quite a bit when I try to start the pin and I don’t know why. So I had to use rocknroll’s version. Thanks for the Dropbox though!
The crashes seems to have to do with the back ramp that goes off the playfield if you adjust the table to show that ramp off screen it will crash. I had many crashes when I modded it. My table is set to about as far back as it can go, if you slightly mod the rear it will crash. As far as the side becoming transparent, it sounds like you need to add the railings, like what I did. I don’t know if you’re referring to the other dt mod or if you’re trying to mod the fs, but that would pertain to if you were modding the fs yourself.
You need to login in order to like this post: click here
I made this in desktop too if anyone wants it. (Don’t know how to put an image on here so I dropboxed the image.)
https://www.dropbox.com/s/kcjfnc74pcksug6/walking%20dead%20vpinball.png?dl=0
Here’s the actual dt table dropbox file on it. Everything should work.
https://www.dropbox.com/s/zqhw74cq3nj7n9j/TWD%20%28STERN%202014%29%20Physmod5.vpt?dl=0
Hopefully i did this right this is my first time doing it!!
You need to login in order to like this post: click here
Very Impressive!! The things that can be done with UltraDMD.
You need to login in order to like this post: click here
I decided to try out the pinballx 2.1 update after all. Now on there they post the directory of where pinballfx2 is, which was my problem before. I was running 2.05. Now I have fx2 running with no problem, one fx2. But on 2.1 all my problems are pinball arcade related. I’m running the pbafreecammod and don’t know exactly how I should set it up on pinballx. I was playing with it and I can get it to load up but it seems like once the table starts it stops and goes back to main menu. I tried running PBA as an other program but it does the same as the 2.05 one does, if you say no you don’t want the default PBA or fx2 to play it won’t play on the other system either. I suppose I could run two pinballx’s, the 2.05 and 2.1. One thing I was noticing that was kind of weird on 2.1, when i played pba and then tried vp, my vp’s were twisted 90 degrees or upside down, so maybe they need a pinballx update to 2.11 I don’t know, but 2.05 seems the most stable to me so that’s where my pinballx program will reside.
You need to login in order to like this post: click here
It would be nice if someone could upload some pinball arcade playfield videos. I tried recording some via camtasia studio but I have stutter. I’m using a 750ti video card, I don’t get why it’s stuttering. There are ones available that are not on a pay site up to earthshaker I believe, but the last 9-10 tables are not available on a non pay site.
You need to login in order to like this post: click here
NVM. I didn’t have the updated beta. Awesome table!
what updated beta, I’m having the same problem and i downloaded it 30 minutes ago.
Ok i figured it out. Someone should have mentioned we needed the updated beta build rev2435. I thought at first you mean’t updated table.
You need to login in order to like this post: click here
Gimme Fuel, Gimme Fire, Gimme that which I desire OOH!!
Can’t wait. You need to login in order to like this post: click here
Looks fantastic! I think the dark table is the way to go. Much more realistic looking. Your Sopranos is the perfect “darkness” for my liking.
That’s the great thing with VP10, if you don’t like the lighting you can change it. I know Fren uploads dark tables and I don’t really prefer them that dark but in a snap my problem is solved and the table actually looks much better to me. It all depends on the lighting in the room you play the table in I guess.
You need to login in order to like this post: click here
It’s the XML in the Pinball FX2 directory of PinballX, actually don’t think deleting it works, you have to rename it
I think I tried renaming it and all I got was two Fx’s not working. Funny thing is I got the pinball arcade working really easy. It’s probably something that needs to be toyed with to be solved. I just wish pinballx would show what directory it’s looking for and my problem would be solved and I wouldn’t be guessing the directory which is what I feel like I’m doing.
PinballX released in it’s latest version pinball arcade support, so in a way I’m afraid to try it cause the same might happen to me.
You need to login in order to like this post: click here
I don’t personally use fx2 so I’m no help… don’t think randr does either. I notice PinballX keeps trying to auto-install the fx2 tables into the front end though, I need to keep deleting that config file every time I update…
What config file? I have the same problem of fx auto installing in pinballx. In my case it doesn’t work. I moved the file to another location and it does work. But now my problem is i have two of each FX table and would like to delete the auto install or I would need to know exactly what’s the file location of the auto install, where exactly is pinballx looking for it. I could just reinstall steam in it’s default location, but that means redownloading all my games.
So far i’ve put up with this but it would be nice to sort it out. 
You need to login in order to like this post: click here
Job well done that looks awesome!!
You need to login in order to like this post: click here
You need to login in order to like this post: click here
