Forum Replies Created
-
AuthorPosts
-
PupPacks i’d love to see in the future:
-Gremlins (FP)
-Evil Dead 2/Army of Darkness (VPX)
-SouthPark (VPX)
– Butters (FX3)
-TMNT (vides from either the first movie or 1990s cartoon) VPX
– Resident Evil (VPX)
– Friday the 13th (VPX)
– The Simpsons (VPX)
– Pet Semetery (VPX)
– Child’s Play (VPX)
– Fintstones (VPX) – When the newer one is released
– Independence Day (VP9)
– Congo (VPX)
– King Kong (VPX)
– Dr. Who (VPX)
– Family Guy (FX3)
– Bob’s Burgers (FX3)
– Deadpool (FX3)
– Jurassic World (FX3)
– The Adams Family (VPX)
– Predator (VPX)
– Son’s of Anarchy (VPX)
– Ghostbusters (Slimer) (VPX)
– Popeye Saves the Earth (VPX)
– Tales from the Crypt (VPX)
– Austin Powers (VPX)
– Basically any star wars table?
– I dream of Jeanie (VPX)
– Hook (VPX)
– Jetsons (Future Pinball)
You need to login in order to like this post: click here
Solid pup pack. Pup packs i’d love to see in the future:
-Gremlins (FP)
-Evil Dead 2/Army of Darkness (VPX)
-SouthPark (VPX)
– Butters (FX3)
-TMNT (vides from either the first movie or 1990s cartoon) VPX
– Resident Evil (VPX)
– Friday the 13th (VPX)
– The Simpsons (VPX)
– Pet Semetery (VPX)
– Child’s Play (VPX)
– Fintstones (VPX) – When the newer one is released
– Independence Day (VP9)
– Congo (VPX)
– King Kong (VPX)
– Dr. Who (VPX)
– Family Guy (FX3)
– Bob’s Burgers (FX3)
– Deadpool (FX3)
– Jurassic World (FX3)
– The Adams Family (VPX)
– Predator (VPX)
– Son’s of Anarchy (VPX)
– Ghostbusters (Slimer) (VPX)
– Popeye Saves the Earth (VPX)
– Tales from the Crypt (VPX)
– Austin Powers (VPX)
– Basically any star wars table?
– I dream of Jeanie (VPX)
– Hook (VPX)
– Jetsons (Future Pinball)
You need to login in order to like this post: click here
This table is epic. Future PupPack tables i’d love to see.
-Gremlins (FP)
-Evil Dead 2/Army of Darkness (VPX)
-SouthPark (VPX)
– Butters (FX3)
-TMNT (vides from either the first movie or 1990s cartoon) VPX
– Resident Evil (VPX)
– Friday the 13th (VPX)
– The Simpsons (VPX)
– Pet Semetery (VPX)
– Child’s Play (VPX)
– Fintstones (VPX) – When the newer one is released
– Independence Day (VP9)
– Congo (VPX)
– King Kong (VPX)
– Dr. Who (VPX)
– Family Guy (FX3)
– Bob’s Burgers (FX3)
– Deadpool (FX3)
– Jurassic World (FX3)
– The Adams Family (VPX)
– Predator (VPX)
– Son’s of Anarchy (VPX)
– Ghostbusters (Slimer) (VPX)
– Popeye Saves the Earth (VPX)
– Tales from the Crypt (VPX)
– Austin Powers (VPX)
– Basically any star wars table?
– I dream of Jeanie (VPX)
– Hook (VPX)
– Jetsons (Future Pinball)
You need to login in order to like this post: click here
Yes @dgrace , with the magnasave buttons, you can change anytime
Thank you!
You need to login in order to like this post: click here
1 user thanked author for this post.
Solid table. Is there a way to choose your starting song using your flippers (similar to Metallica table)? Just curious. Thx
You need to login in order to like this post: click here
You need to login in order to like this post: click here
1 user thanked author for this post.
I have a pindmdv3 real DMD. Would recommend this one or the one that doesn’t have the Pixelate and DOT matrix overlay? Thanks
You need to login in order to like this post: click here
Will this work for pinup popper and for pindmdV3? Thank you
You need to login in order to like this post: click here
May 31, 2019 at 4:51 pm in reply to: The Addams Family (Bally 1992) V2 – G5K, Sliderpoint, 3rdAxis #130309Is anyone working to get Evil Dead VPX working? Would be the greatest pup pack video table ever. LOL:)
You need to login in order to like this post: click here
You ever figure this out? I’m having the same problem. I have my pindmd3 working outside of popper when playing FX2 or FX3, but can’t get the real dmd to grab if launch a FX3 or 2 game directly popper. Thanks
You need to login in order to like this post: click here
April 16, 2019 at 1:39 pm in reply to: Freezy DMDExt 1.7. A universal DLL for real DMD, virtual DMD, and PinUP System! #124378I recently purchased a real DMD (pindmd3) and it’s awesome. I got the real dmd to work with Visual Pinball and most Future Pinball games. FX2 and FX3 were a little tricky but I eventually got it working with them as well using freezy’s dmdext. However, I’m not sure how to integrate it into popper since I have to load the bat before loding FX2 or FX3. For example below were the steps I took to get it working initially with a bat file.
Create a directory on your C drive called DMDExt So C:\dmdext. Copy the freezy 1.71 dll and other files in that directory a swell as the DMDext.exe from the bottom of the 153 thread on freezy’s github.
Then you can create a dmdfx3.bat file by putting the following in notepad and saving as dmdfx3.bat (or dmdfx2.bat for Pinball FX2) to your desktop
cd “c:\dmdext”
dmdext mirror –source=pinballfx3 –no-virtual
Save as dmdfx3.bat or whatever to desktop. You can then double click on the file and it will launch waiting for you to start fx3 etc.. Or you can manually launch through cmd prompt every time by going to cmd from run command
then typingcd dmdext
then
dmdext mirror –source=pinballfx3 –no-virtual
But now, I’m not sure how to load the bat file while in popper to ensure the real dmd is recognized. I tried messing with some of the scripting or trying to add the bat file via a script, but no luck. Even if I load the bat file first and then launch popper, I end up getting a pindmdv3 error message. Any direction would be greatly appreciated. Thank you
You need to login in order to like this post: click here
The pinup install support topic was closed so I thought I’d ask here. I recently purchased a real DMD (pindmd3) and it’s awesome. I got the real dmd to work with Visual Pinball and most Future Pinball games. FX2 and FX3 were a little tricky but I eventually got it working with them as well using freezy’s dmdext. However, I’m not sure how to integrate it into popper since I have to load the bat before loding FX2 or FX3. For example below were the steps I took to get it working initially with a bat file.
Create a directory on your C drive called DMDExt So C:\dmdext. Copy the freezy 1.71 dll and other files in that directory a swell as the DMDext.exe from the bottom of the 153 thread on freezy’s github.
Then you can create a dmdfx3.bat file by putting the following in notepad and saving as dmdfx3.bat (or dmdfx2.bat for Pinball FX2) to your desktop
cd “c:\dmdext”
dmdext mirror –source=pinballfx3 –no-virtual
Save as dmdfx3.bat or whatever to desktop. You can then double click on the file and it will launch waiting for you to start fx3 etc.. Or you can manually launch through cmd prompt every time by going to cmd from run command
then typingcd dmdext
then
dmdext mirror –source=pinballfx3 –no-virtual
But now, I’m not sure how to load the bat file while in popper to ensure the real dmd is recognized. I tried messing with some of the scripting or trying to add the bat file via a script, but no luck. Even if I load the bat file first and then launch popper, I end up getting a pindmdv3 error message. Any direction would be greatly appreciated. Thank you
You need to login in order to like this post: click here
Will the pup pack still work with this mod? Just curious Thanks
You need to login in order to like this post: click here
Thanks man. Any chance you could share all your Future Pinball wheel images? I can’t seem to find many online specifically for Future Pinball.
You need to login in order to like this post: click here
1 user thanked author for this post.
The frontend popper will eventually load but not before I get this error repeatedly. I imagine it has something to do with my default media directory? Any feedback is much appreciated. See pic
Nevermind. Wouldn’t let me attach pic. Error says “Cannot open file “G:\Visual PInball\PinUPSystem\PopMedia\Visual PinballX\System\pup_default.png”
Need more info than that.
Did Popper work before the 1.4 update?
Did you make any changes?
Did you replace the wheelbar image for ALL your Playlists?
Did you use the png’s i provided? Or did you make new ones?
If you made new ones, then try to rotate them i Win 10 image viewer, and then rotate back to convert the image to a proper png format that Popper will use.
I never used popper before the 1.4 update. I installed 1.36 first and then added the update and then used it. I added the wheel bar for all playlists. I only used the pngs you provided. I’m going to go back and re-watch the videos and go through the steps again.
Update: It was something with one of my media default folders. I went back and reset all of them and now it works fine. Sorry about that. Thank you
You need to login in order to like this post: click here
The frontend popper will eventually load but not before I get this error repeatedly. I imagine it has something to do with my default media directory? Any feedback is much appreciated. See pic
Nevermind. Wouldn’t let me attach pic. Error says “Cannot open file “G:\Visual PInball\PinUPSystem\PopMedia\Visual PinballX\System\pup_default.png”
You need to login in order to like this post: click here
Anyone willing to release a working table for this game? Thanks
You need to login in order to like this post: click here
Great table but volume is super low. Is there a way to make it louder without making all the other games super loud? It’s individual settings are already at 0.100 each. Thanks
You need to login in order to like this post: click here
Thank you @outhere! I totally forgot about that setting option. I kept thinking you had to do something with the script. Should do the trick. Thanks a bunch.
You need to login in order to like this post: click here
Greetings, solid pup pack. Super fun. Just having two minor issues.
1. I understand the pup packs run better when you have directb2s disabled. However, if you do that you get the directb2s error message every time which can be a real pain in the ass. You can’t really disable for all tables because then you won’t have a backglass for your non-pup pack tables. How do you disable the directb2s for tables individually and not as a global setting?
2. Most of my pup packs run very smoothly. However, just this one can be very laggy. I’ve tried all the settings changes from the troubleshooting page. Still lags at times. Below is my pup log. Any help is greatly appreciated. Thank you
20190402 23:46:30 Open called
20190402 23:46:30 Set Game Name thread ij_l7
20190402 23:46:30 Start Thread Matching
20190402 23:46:30 create PuPCap
20190402 23:46:30 Init Game name:ij_l7
20190402 23:46:30 Create Object Display
20190402 23:46:30 imagedir:G:\VISUAL~1\Tables\PINUPP~1\PuPVideos\ij_l7\PuPCapture
20190402 23:46:30 num images 109
20190402 23:46:44 Free Object DisplayYou need to login in order to like this post: click here
-
AuthorPosts