Forum Replies Created
-
Posts
-
Update: Messing around with other settings and had nothing to do with the update. Love this table. Thanks for the update. ‘Updated the table to 1.1 but I do not get the DMD to appear now. I was using the color DMD files before. Any ideas?’
You need to login in order to like this post: click here
Has anybody tried this and is it working for you?
I will try this tomorrow and report back. Thanks and happy new year everyone!
You need to login in order to like this post: click here
Thank you – that was it. I am running a 4k playfield so I have that monitor set to 300% for scaling. The backglass and DMD monitors are set at 100% but no matter. Unless I change the playfield to 100% also, it doesn’t display properly. I set it at 300% so I can see things on the desktop when I need to do different things. It’s not a huge deal – I will just set the scaling to 100% on the playfield before I start the front end and can change it back afterwards. Hope this helps others.
You need to login in order to like this post: click here
Hi gang – installed pinup to play this table. It looks fantastic but the backglass provides this when I play. Any ideas? I have a 27″ backglass monitor running at 1900 x 1200 resolution. It just seems like the videos, etc are running at the wrong res. Many thanks!
You need to login in order to like this post: click here
Thank you for the help – it was indeed that DMD setting in vpinmame. Fantastic table!
You need to login in order to like this post: click here
Hey guys – I am struggling to find out where in the script I need to edit to not have my 3rd DMD screen show up since the scores are directly in the DMD. Using latest everything inc 10.6 final. Any help would be greatly appreciated.
Thanks!
You need to login in order to like this post: click here
My favorite cartoon and this table recreation does it justice! Thanks so much! I am running it on my 4k cabinet and using the color ROM also. I have 200 other VPX tables loaded that run fine and I do use 300% scaling on the Windows desktop so I can see what I am doing outside of actually playing. With that said, this is the only table that forces me to run 100% scaling or the DMD will not display at all. Is this a setting I need to change to have the DMD still display without always changing the scaling to 100%? TIA!
You need to login in order to like this post: click here
Good to know. I love those older tables and that one is a gem :). Thanks!
You need to login in order to like this post: click here
Texture compression is off. I did some more timings with a stopwatch starting when I clicked open and got the following:
TOTAN 4k – 20 seconds
Attack From Mars – 16 seconds
Eight Ball Deluxe – 10 seconds
STTG – 18 seconds
Capt Card – 30 seconds (!)
For those of you who know what timings are supposed to look like, are these in the realm of being normal then (outside of Capt. Card that is)?
I haven’t done any timings in regard to selecting ‘play table’ to see what those look like at this point.
Thanks in advance.
You need to login in order to like this post: click here
I do – I am using Loserman’s b2s backglass. Once it all loads, things work just fine. I will test load times for some other tables tonight now that my curiosity is piqued. I know that load times have increased in 10.6, I just don’t recall seeing tables load this slow. More to come.
Oh and thanks for your reply.Â
You need to login in order to like this post: click here
On a SSD or regular HD ? Changes was made during 10.6 that will increase the loading time. For PBY, that I use for recording in frontend, has on my cab a pause of 25 seconds and I do have a SSD. I used to have it set for 20, but, a few of the tables, TAF, pr. example made me change it to 25. I should get me a M.2.
It’s a 250GB SSD. I wonder if I can change PBY to something greater than 25 seconds? When I tried to capture video last night it didn’t work just because the table hadn’t loaded yet. I knew the load times were greater with 10.6 but I didn’t recall them taking *this* long. The only changes I made were using the very latest VPX beta and I did allow the Windows 10 updates to take place (which I now regret). I will mess around some more with the Windows security settings when I get home tonight to see if I can make it any better.
You need to login in order to like this post: click here
I cannot find a B2S for this table. Any suggestions? Thx.
You need to login in order to like this post: click here
I have been unable to find the ROM. Can anyone help? Thx.Â
You need to login in order to like this post: click here
I love this but with the latest version of PinballX (as of 05/22/2018), when I load a VP table with this in place, I cannot escape back to the PinballX front end again. When I change it back to the original Loading png file, I can escape back. No idea what’s going on but I am bummed about it.
You need to login in order to like this post: click here
