Forum Replies Created
-
AuthorPosts
-
I did the same as onevox as when I built mine the extras weren’t in the budget. I always figured I could change it around later if I wanted but it’s been 2 years and I’m more than happy with the way it is. My tv is spaced evenly in between the front of the cab and the backbox.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
Happy Birthday! Thank you for all you do.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
January 19, 2021 at 6:32 pm in reply to: Is this the new Best Bang for the Buck 43″ 4K Playfield Screen? #22025443UK6300 I’m pretty sure is the model I have
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
January 19, 2021 at 12:41 pm in reply to: Is this the new Best Bang for the Buck 43″ 4K Playfield Screen? #220228I voted ips because that’s what my lg is and it has performed well for me. I cant really say which is best because I never used any of the others.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
Thank you skitso! Your mods are amazing. Glad to hear VPin Workshop is gaining another talented individual.
Thank you roth, bord, the original authors and everyone else involved in this release.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
3 screens is supported when using pup
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
In between trying different versions of the pup pack are you completely removing the old one?
Make sure you run the bat file inside the pup pack that matches your screen configuration.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
I like the idea of this. As with anything people will have mixed opinions on it.
I myself don’t contribute any content due to lack of skills and time. Hopefully some day I can. I do however greatly appreciate those that do and share it with the community. I understand the countless amount of time that goes into creating and maintaining the content that we all enjoy. Those that give all that time deserve to be recognized. I believe that this is something meant for the community to show appreciation.
This hobby definitely continues to grow. The biggest enemy is those that continue to sell all the hard work of the creators against their wishes. That is uncalled for and complete bullshit.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
1 user thanked author for this post.
This would be nice to have in visual pinball. I’d throw some bucks on it.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
October 13, 2020 at 1:16 pm in reply to: Looking for CNC files for a Williams Widebody pinball machine #204550I found this if it helps
https://forums.maslowcnc.com/t/pinball-machine/13078
There are a few cnc build threads over at vpf. Maybe try contacting the authors of those.
Plans from mameman at vpu
http://vpuniverse.com/forums/topic/171-plans-williams-widebody-cabinet-plans/
There are also some flat packs already cut out from places like virtuapin if you want a little easier route.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
I’m guessing something to do with the rom. Make sure you have the correct rom for the table you are loading. The rom should be zipped and in the vpinmame\roms folder. Check the roms by going into vpinmame folder. Run setup and hit the test button to check individual roms. Also hit the install button under setup to make sure vpinmame is installed.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
1 user thanked author for this post.
What is the error you get?
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
I enjoy this table. Thank you for the big update. It looks really good.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
The 980 Is a powerful card but a bit outdated. I’d go with the 1060 due to the fact it has more ram.
You can run 4k on either. I ran 4k on my 970 for a bit. Just had to tweak a lot of settings.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
Looks amazing from the screenshot. Cant wait to try it out.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
I’m right there with ya Matt. I didnt put much time in this table until recently and managed to claim the grand champion. That’s a big accomplishment for me (my avatar says it all). Its a gorgeous table.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
@hoop22 Did you try adjusting the rom volume with 8 and 9 keys?
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
1 user thanked author for this post.
Loserman provides wheels with most of his tables. There are a lot of wheels available at vpf also.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
Did you look at section 111 of the guide. It discusses that very issue. My playfield tv fortunately had a setting to enable it to turn on with the computer. My backglass tv unfortunately does not but I havent gotten around to figuring that out yet. Another thing I was looking at was a cec adapter which might work as well.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
Thanks a lot Siggi! I’m waiting ever so patiently for season 2 to drop. This should help the wait.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
1 user thanked author for this post.
-
AuthorPosts