Forum Replies Created
-
AuthorPosts
-
Hi, Tom. For me, it is the Black Knight 2000 that gives the problems with the minimized playfield. As you suggested I looked in the B2STableSettings.xml but found out that the settings for the bk2k_l4 rom is in there already. The section for Black Knight 2000 also looks the same as some other tables that don’t give problems. So in my case it I think it must be something else.
P.S. removing the -minimized flag from the startup sequence from Popper still works for me, and no problems so far with other tables, backglasses or Pup-Packs.
-
This reply was modified 3 years, 3 months ago by
Cordsl.
You need to login in order to like this post: click here
you could remove the -minimized flag that is sent to vpinball.exe in your popper launch script.
BUT, that helps hide the vpinball editor during launch for some scenarios. so if you do take it out then you may see the vpinball editor popup.
better to try and figure out what is happening if its just one or two tables. starting with the directb2s file.
I have a 3 screen setup and the same problem with some tables when using Popper and VPX is set to: Force Exclusive Full Screen” . I tried everything mentioned here:
- Disabling the b2s grill: no effect.
- Selected “small” and I unselected start in exe mode in B2Ssettings: Playfield visible but enormous ball stutter.
- When removing the directb2s file from tables directory the playfield is visible.
- When I use Alt-Tab I can see the screen is active, tabbing to field vpxplayer and then release both buttons brings up the playfield.
- I also made a very minimal (1 picture and reels) alternate backglass in the B2S Backglass Designer. When putting this in the table folder playfield is visible. But of course this is not what I want.
The only thing that really solved it was removing the -minimized flag. Everything starts up well. When I use the Q-button to exit the table I see the vpinball editor still is minimized !
So thanks for the tip Nailbuster.
You need to login in order to like this post: click here
Installed your update today. Looks great and plays great on 4k! Thanks
You need to login in order to like this post: click here
SOLVEDUpdated the table via the update function in Pinup Popper. Because of this I hadn’t noticed that I still had a VBS script with the same name in the folder tables.The table looks slick, but unfortunately it won’t load. I am getting script errors. Do I have to change a setting?
That looks like there’s something wrong with your setup, are you using the latest VPX etc.?
As far as I know I am up to date using VPX 10.6 and the latest sambuild.
Updated the table via the update function in Pinup Popper. Because of this I hadn’t noticed that I still had a VBS script with the same name in the folder tables.
-
This reply was modified 3 years, 4 months ago by
Cordsl.
You need to login in order to like this post: click here
Deleted, sorry was a double posting.
-
This reply was modified 3 years, 4 months ago by
Cordsl.
You need to login in order to like this post: click here
The table looks slick, but unfortunately it won’t load. I am getting script errors. Do I have to change a setting?
You need to login in order to like this post: click here
This is e real beauty, thanks Bord and everyone who worked on this table!
You need to login in order to like this post: click here
Hello, first: thank you for the great looking and playing table. I enjoy playing it. There is one thing though, I can only play with one player. The game will not add another player when I push the start button again. I installed the game on my laptop today and I had the same issue there.
-SOLVED- Found it. You have to push the start button for the second player before the ball shows up in the shooting lane. I was too slow
-
This reply was modified 3 years, 5 months ago by
Cordsl.
You need to login in order to like this post: click here
1 user thanked author for this post.
What an improvement of an already great table, thanks!
You need to login in order to like this post: click here
I have sound now, here’s what I did:
The first playboyb rom I used was downloaded from IPDB.org. That one gave no sound on my cab. Because of that I searched for the same rom here on vpinball.com. I noticed that the files, although the same names, had different sizes?? 50kb on IPBP and only 5kb here at Vpinball. Thinking I probably found the issue I replaced the IPDB one for the 5k version. I Still had no sound. After replacing the playboyb rom for the playboy rom (dowloaded from VPForems) I had sound but noticed it was a 6 digit version. That’s when I stopped trying and placed my question here. Today I started up my machine again and becuase I have both roms in the folder now I changed the Gamename once more to playboyb and I had sound!!
Found out that after deleting the playboy rom again (including cfg and nv files) sound was gone again! Just replaced in the romfolder and the sound was there again!
You need to login in order to like this post: click here
Thanks for the great table guys and the good music. I have one question: Is the playboyb.zip a muted rom? I could not get any sound out of that one, so I replaced it with the playboy.zip rom. That one gives sound, but it looks like it is a 6-digit-rom. I have my table options set like this:
‘+++++++++++++++++++++++
‘+ TABLE OPTIONS +
‘+++++++++++++++++++++++
‘————————————————————————————————————-
MusicOption1 = 1 ‘1 = Gameplay Music ON 0 = Gameplay Music OFF
MusicOption2 = 1 ‘1 = Random Gameplay Music ON 0 = Random Gameplay Music OFF‘MusicOption1 MUST BE SET TO 1 in order to also use the MusicOption2 Random feature
‘————————————————————————————————————-
PlayMusicOnStartup = 0 ‘1 = Start Music on Table Startup 0 = Start Music Manually
‘————————————————————————————————————-
BallApronCard = 3 ‘Set to Either 3 or 5 depending on which ROM balls setting you are using
‘————————————————————————————————————-
InstructionCard = 1 ‘Set to 1 for Card Rules E Set to 2 for Card Rules F Set to 3 for Card Rules G
‘——————————————————————————————————————–
AddBallShadow = 1 ‘1 = Ball Shadows ON 0 = Ball Shawdows OFF – Turn OFF if using Ambient Occlusion
‘——————————————————————————————————————–
AddFlipperShadows = 1 ‘1 = Flipper Shadows ON 0 = Flipper Shawdows OFF – Turn OFF if using Ambient Occlusion
‘——————————————————————————————————————–You need to login in order to like this post: click here
I noticed Andrew’s new overlays, and I am certainly going to use them. But for some tables I like to use the external DMD.
You need to login in order to like this post: click here
What a great looking Pup-Pack! Thanks for sharing!
You need to login in order to like this post: click here
I had the exact same problem after a complete reinstallation as described in first post from stampedem. Also for me just installing EQAPO fixed the problem.
You need to login in order to like this post: click here
Thanks for the update
You need to login in order to like this post: click here
Nice Pic, i’m going to use it on VP Nation.
You need to login in order to like this post: click here
One of my favorites table, thanks.
You need to login in order to like this post: click here
I am also trying to get a shaker running. The shaker is in the cab and works, but only full on or full off. I just found out this is not the way. I ordered the H-bridge shown in the picture. My question is: can i use the same wiring to connect it to a standalone kl25z with pinscape on it?
You need to login in order to like this post: click here
Thanks for the POV settings. I am also a fan of as less as possible narrowing the tables. Your settings are a great starting point for all my tables. I only adjusted the x-scale and x-offset so you don’t see the whole apron on most tables. A lot off tables have a “shoot again” light between the flippers, when it is oval shaped i try to make it as round as possible so i come closer to the real dimensions imo.
You need to login in order to like this post: click here
Thanks for the the great looking and playable table.
The music really completes the table.
You need to login in order to like this post: click here
-
This reply was modified 3 years, 3 months ago by
-
AuthorPosts