Forum Replies Created
-
AuthorPosts
-
@abique
Yes I do But I use a Real Pin2DMD But same settings should work for LCD
If you are using a LCD
For FX3 I use these settings — dmdext.exe and PUPDMD — https://www.nailbuster.com/wikipinup/doku.php?id=popper_fx3
for LCD – Change x y w -o to the position of your LCD Example –> 4165 305 1283 370
I’m using Freezy dmdext 1.80 or newer
Put this at the top of your launch script below @echo offif "[CUSTOM2]"=="DMDEXT" (
cd /d "C:\Visual Pinball\VPinMAME"
start /min "" "dmdext.exe" mirror --source=pinballfx3 -q -d auto --virtual-hide-grip --virtual-position=x y w -o PinUP\[GAMENAME]
) else (
cd /d "C:\Visual Pinball\VPinMAME"
start /min "" "PUPDMDControl.exe" FX3 PINUP\[GAMENAME]
)
Then go to game manager on the left pick the game on the right under custom var #2 put DMDEXT for all the games that need dmdext
You need to login in order to like this post: click here
hmm..
so when i play fx3 and doflinx FP tables, my undercabs are working, so that proves the doflinx.ini is working for atleast those, right? unfortunately i am getting noting from my solenoid board. any suggestions on how to test those or a good table that uses lots of beacons, shaker, gear, fan, knocker
To check to make sure you have your DOFLinx.INI set correctly with the right Hardware and port number
Put thisDEBUG=2in your DOFLinx.INI file restart DOFLinx
A window will open Right click that And Click on test devices then You can test which hardware and port for each item
When done set this to DEBUG=0
@armyaviationSorry Tom Use DEBUG=1
You need to login in order to like this post: click here
1 user thanked author for this post.
hmm..
so when i play fx3 and doflinx FP tables, my undercabs are working, so that proves the doflinx.ini is working for atleast those, right? unfortunately i am getting noting from my solenoid board. any suggestions on how to test those or a good table that uses lots of beacons, shaker, gear, fan, knockerTo check to make sure you have your DOFLinx.INI set correctly with the right Hardware and port number
Put this DEBUG=2 in your DOFLinx.INI file restart DOFLinx
A window will open Right click that And Click on test devices then You can test which hardware and port for each item
When done set this to DEBUG=0You need to login in order to like this post: click here
1 user thanked author for this post.
@abique
See –> Aliens FX3 PuP-Pack Not triggering videos
Try this – https://www.nailbuster.com/wikipinup/doku.php?id=popper_fx3#aliens_fx3_pup-pack_not_triggering_videosYou need to login in order to like this post: click here
I tried them in future pinball folder and then bam folder. I ran as admin and then double clicked the exe and moved and resized then closed. Doesn’t pop up
If you are trying to get it working outside of a front end then you have to start it and leave it run in the background
They go in future pinball folder
No need to run as admin
Go into the FutureDMD.ini reset these settings, This will get back to the playfield
Then restart FutureDMD and move it to the right screen
Then resize and pick the right screen number
PosScreen=0
PosX=0
PosY=0You need to login in order to like this post: click here
1 user thanked author for this post.
fixed it, thanks @terryred. the only thing i have left to do is setup future dmd. a im having a hell of a time, its not triggering. is that the most current program to get a dmd on the 3rd screen and does that work on doflinx and ultimate tables?
What folder did you put the futuredmd files in ?
It work with FP tables that Have A dmd
More info in the PDF file that comes with futuredmdYou need to login in order to like this post: click here
hi everyone,
i tried everything but the rom doesn’t work… any help is welcome
thanksSearch here for the rom – https://vpuniverse.com/forums/discover/
-
This reply was modified 3 years, 3 months ago by
outhere.
-
This reply was modified 3 years, 3 months ago by
outhere.
You need to login in order to like this post: click here
Thank you Major Frenchy. I am sure the issue I am experiencing is user error, but I cannot get Future DMD to work with the table :( Any idea on what it could be?
Anyone get this working on futuredmd?
thanks.You have to add this to the game – http://www.gopinball.com/forum/viewtopic.php?nomobile=1&f=55&t=5050
You need to login in order to like this post: click here
have a problem.
When loading a table in PinupPopper, the Visual Pinball Toolbar always pops up
Thank youIf you are referring to the loading Indicator Like brandonlaw is getting, That’s normal for now
You need to login in order to like this post: click here
1 user thanked author for this post.
See attached pic. When I press f1 I get this menu pop up How so I get to the editor to change sound? Can someone please explain.
Try Re-Boot
You need to login in order to like this post: click here
March 15, 2021 at 7:54 pm in reply to: Video very slow and stuttering along with long load times. #229482@zapper
Are you running the right hz on the monitorsYou need to login in order to like this post: click here
March 14, 2021 at 11:29 am in reply to: Demolition Man (Williams)(1994)(Knorr-Kiwi)(FS-DT)(VP10) 1.1 #229329hello i think the music of the game its to low…….how can fix it?
See — tutorials at the top of this page — https://www.vpforums.org/
In volume adjustments, See — Volume Adjustment – Bally/Midway/Williams WPCYou need to login in order to like this post: click here
thanks, great pup however i’m having an issue, hope someone may suggest a fix:
After i play this table/pup via popper, then exit back to popper, any other table i play with a pup doesn’t show the pup screens. I’ve tried a few combinations and it seems to be a consistent issue on my setup solely after playing this table, as explained
Try this – https://vpinball.com/forums/topic/guardians-of-the-galaxy-2/page/24/
You need to login in order to like this post: click here
1 user thanked author for this post.
@thalamus
I was just going to ask you how you go about Updating and/or uploading a new copy of a file But I see you have already done itThanks
You need to login in order to like this post: click here
It’s always nice when you have to suffer through another update – Nice job on the game Thank you
One thing I did notice if you’re change in a LUT and when you’re done sometimes a little flipper will be stuck upYou need to login in order to like this post: click here
DOF Off command
Can you please share/post exactly how you set the DOF off on the script to get the flippers solenoids to disengage?
Thanks
@stargate66 Try this scriptAttachments:
You need to login in order to like this post: click here
1 user thanked author for this post.
@outhere, thanks for your answer.
So, if i understand, my pin2DMD will show nothing ?
Yes
You need to login in order to like this post: click here
I have SAMbuild 3.3b I have the same problem : Game Name Not Found” Line 142 ?
So I thought I would test it out
it didn’t work for me at 1st either but I ran one of the other Metallica games with the same rom and after that it works fineYou need to login in order to like this post: click here
hi everyone,
i have a pin2dmd and it shows nothing…
I have unzip the 2screen in the root directory but still nothing.
Where is the ultradmd line in the script, i did’nt find it…
sorry for all the questions but the table looks very nice !!!The is no UltraDMD in the latest version of Munsters 2020
You need to login in order to like this post: click here
I have the same problem : Game Name Not Found” Line 142. I have the ROM “mtl_180hc.zip” on the ROM directory
Go to the VPinMame & Run Setup.exe and test the Rom
If you can’t find it then you need this version of SAMbuild
See SAMbuild 3.3b — https://www.vpforums.org/index.php?showtopic=4982#entry330264You need to login in order to like this post: click here
-
This reply was modified 3 years, 3 months ago by
-
AuthorPosts