Forum Replies Created
-
AuthorPosts
-
I use windows 10 with no problems. I have auto updates disabled just in case. If I was to start a new setup I’d probably stick with windows 10 and give the baller installer a try.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
March 28, 2021 at 8:46 pm in reply to: Stuck on fixing settings (backglass, UltraDMD, and playfield sizes) for a single #231680You could use the tv in portrait mode and run FSS tables.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
Are you using pinvol? The latest release supports ssf. You can up the gain on the front and rear exciters. That’s what I’m currently doing. Going through tables and adjusting the gain to my liking.
I also reccomend updating vpx to 10.6.2 that was just released as it has improved ssf.
On a side note thanks for all the tables you have shared with the community.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
Thanks a lot for the work you put into this. Much appreciated from a guy who runs just ssf. Got 10.6.2 installed and running through some of my tables now and all seems to be working nicely.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
Yep take a well deserved break randr. Everything is quite snappy now. Cheers to you my good man. 🍻
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
Most tables that come with pup packs require them to run. I don’t run pup on anything that’s not an original but it’s worth setting up to play some of them. Scottywic’s original tables are amazing.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
Thank you randr for all the time you put into keeping this site going. Saying the good you do for this community could never be overstated. Knowing you have been hard at it trying to keep the site online is so greatly appreciated.
Also got the push notification on android.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
1 user thanked author for this post.
Look really good. Fantastic job!
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
I play this table quite often so I am very happy to see a release with skitso in the title. Bord with physics contribution will make it even better. Cant wait till I get home tommorow to try it out. Thank you for sharing.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
Pinball legs under 100 new
https://www.pinballlife.com/leg-sets.html
If your building the cab yourself you might also want leg brackets, bolts and levelers which they also have.
I have placed a few orders here. They have a large selection of parts at good prices. Good customer service from my experiences.
Hi my name is Barry and I'm a virtual pinball addict.
-
This reply was modified 3 years, 3 months ago by
Badazzwi.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
That is wicked cool Terry!
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
Cloning the hard drive should work fine as long as it’s going back into the same pc. I know people do run into issues sometimes when trying to put a cloned drive into a different pc. I bought a new drive to clone mine but haven’t done it yet. Hopefully I don’t procrastinate to long and end up with problems.
I highly recommend using a ssd if not doing so already as it will last longer and give better performance. I switched to one early on when building my vpin as my original drive started to die. Luckily I was able to pull most of the data off it before it did.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
If 4k is in the budget then go 4k. Tables look good in 1080 but they look amazing in 4k. Starting off 4k means you won’t have to make changes in the future. Just make sure your graphics card can handle 4k.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
Thanks a lot for this. I was just wrapping up on the cab and I saw this. Love what you did with the lighting. Good way to end my uneventful 40th bday.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
March 9, 2021 at 7:10 pm in reply to: There needs to be some professional courtesy here that is lacking #228608Being that Aerosmith would probably be considered a “small” table you could probably post that right now.
I honestly don’t pay much attention to the front page. I go straight to the all downloads and browse that almost daily to see if I missed anything.
Even so anyone that puts countless hours into creating something deserves their time in the spotlight.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
The guy that that did the retheme for the movies has a thread over on pinside. At the top of the first post he has a link to a making of the machine page.
https://pinside.com/pinball/forum/topic/willy-s-wonderland-nic-cage-horror-film-retheme-
Thank to you to the whole team for putting this together.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
https://vpinball.com/wiki/visual-pinball-knowledge-base/reset-a-table-to-default/
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
2 users thanked author for this post.
February 26, 2021 at 4:59 pm in reply to: Al’s Garage Band Goes On A World Tour (AlvinG 1992) anti(Mod) #226284Thanks for the update. Haven’t tried it yet but looks like you put a ton of hours in reading through the changelog. Thank you for all your hard work and sharing it with us. Thank you to the original authors and all those who put work in along the way.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
That’s how mine was and after trying to calibrate it 20 times I realized I had the wires wrong.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
You can’t get any better than G5K version of T2. Thank you for making it available once again.
Hi my name is Barry and I'm a virtual pinball addict.
Hi my name is Barry and I'm a virtual pinball addict.
You need to login in order to like this post: click here
-
This reply was modified 3 years, 3 months ago by
-
AuthorPosts