Forum Replies Created
-
AuthorPosts
-
Thanks for the Udate
You need to login in order to like this post: click here
1 user thanked author for this post.
@magius74
IN FX3 turn off the back glass display
Then go to media manager in popper and download the videos for FX3 that you don’t have
Then go to the emulator and set the back glass to run all the time in — keep displays on
For the ones that have puppacks go to the game Manager Keep displays on put none for the ones that have puppacksYou need to login in order to like this post: click here
1 user thanked author for this post.
You need to follow the directions and the example from here and it should work
https://www.nailbuster.com/wikipinup/doku.php?id=pupdmd_fx3You need to login in order to like this post: click here
1 user thanked author for this post.
March 9, 2021 at 2:59 pm in reply to: Please help me with vanishing Full dmd>…………>&^%$#$%^&* #228564I am too far in for that one. This issue didn’t even exist with my 970 card so I am baffled. I had dmd movies playing for many tables that didnt have dmds
I run a 1070 card and works fine with everything
I can use the 5 ports on the card plus the On board but it’s all depends on the hardware
I would turn off the onboard see what happens make sure your drivers are up-to-date you may have to update the bios or something
Make sure you have the video card in the best slotYou need to login in order to like this post: click here
March 9, 2021 at 10:31 am in reply to: Please help me with vanishing Full dmd>…………>&^%$#$%^&* #228451I was thinking last night what has changed and it was me updating from a gtx970 to a 1070 card. That’s the difference. Why that card wouldn’t work well with my onboard card I can’t tell
Sometimes the on board video stuff does not like working with a video card your best bet is a shut it off in the bios
You need to login in order to like this post: click here
Scotty, Thanks for this table! I got the vpx downloaded but each time I try to download the PupPack it gets to about 90ish percent and shows a failed-forbidden error. Have you encountered this before? I am in chrome where I have downloaded other packs without issue thus far. Any insights by you or others in the community are appreciated! Thanks again!
All good here with FireFox
You need to login in order to like this post: click here
Worked fine with 7-zip
You need to login in order to like this post: click here
hi, i have this problem..
I use my tables at exclusive fullscreen mode and some tables like bride of pinbot has internal dmd aspec ratio and position in a bad place.. *look at image
i like to know how change aspect ratio and position of internal dmd. Dont wanna use it in window mode.
Already try change settings of pinmame32 (directdraw, direct3d) with no effect
any help welcome.
(sorry for my bad english)2 and 3 Screen set-up – https://vpinball.com/forums/topic/3-screen-set-up-and-more/
You need to login in order to like this post: click here
When I use this combination The DMD is black-and-white and some areas with Bluish background – For either set of the color files
SAMbuild 3.3b form vpuniverse
Freezys 1.8.2You need to login in order to like this post: click here
@yardley  What front end are you using?
DMD will not be in color when using 1.8 Freezy with a version newer then SAMBuild_r4906.zip (For me it will not)
With newer version of SAMBuild You will need to use Freezy 1.71 for Super Mario Bros- This reply was modified 3 years, 3 months ago by outhere.
You need to login in order to like this post: click here
Thanks for the great table one question
What’s the difference between the file A, B, or C? is like 2.0.1 or 2.0.2….? means C is the last update?
See the Changelog Tab
You need to login in order to like this post: click here
Dumb question of the day….
Can I use this as is (and it replaces the orange dmd within vpx) or is this for physical virtual pinball tables that have a pin2dmd hardware and it’s a rom for that device?
I’m currently trying to figure this out as well. Is there a way to at least rotate the dmd to lay it on top of the playfield?
Is there a way to at least rotate the dmd ( Freezy )Â — No
You need to login in order to like this post: click here
1 user thanked author for this post.
2 weeks ago I updated mine to 4.06 and after I did the firmware update
I had to restart the DMD before the key would takeYou need to login in order to like this post: click here
I last had Pin2dmd 2.39 on my cabinet, worked great. I’m going through a clean install now and have the dmd hooked up but am struggling to get it working. I finally got the driver installed, and I have my old activation key, but the new version of pin2dmd software doesn’t recognize the key, and if I use the backup files and put the key in the folder with the pin2dmd.exe, it doesn’t work either. The installation instruction don’t really explain the next step clearly, and since VPU is down I think all the helpful documentation is out of reach. Anyone able to help? Thanks!
Will this help — https://pin2dmd.com/installation/
You need to login in order to like this post: click here
Search — dw_l2
https://www.vpforums.org/index.php?app=core&module=search&do=viewNewContent&search_app=forums
https://vpdb.io/games
https://pinballnirvana.com/forums/resources/categories/roms.5/?order=title&direction=asc
https://vpinball.com/VPBdownloads/categories/pinball-machine-roms/You need to login in order to like this post: click here
Hi, where can I get the table and the rom for super mario? VPuniverse is down at the moment.
You need to login in order to like this post: click here
Excellent work and fun table. I, too, am having the DMD not showing on the third screen issue. I am sure I am overlooking something but it has me stumped for now. I will enjoy playing on 2 screens until I get this sorted. Thanks for sharing
Post your — ScreenRes.txt
You need to login in order to like this post: click here
1 user thanked author for this post.
Do not change these
Sub DTLdrop(enabled)
if enabled then
PlaySoundAt SoundFXDOF(“DTReset”,107,DOFPulse,DOFContactors), psw28
gi35.State=1
gi40.state=0
DTRaise 28
DTStatus(0)=0
DTRaise 29
DTStatus(1)=0
DTRaise 30
DTStatus(2)=0
end if
End SubSub DTRdrop(enabled)
if enabled then
PlaySoundAt SoundFXDOF(“DTReset”,108,DOFPulse,DOFContactors), psw31
gi12.State=0
gi41.state=1
DTRaise 31
DTStatus(3)=0
DTRaise 32
DTStatus(4)=0
DTRaise 33
DTStatus(5)=0
end if
End SubHave these Be 111
Sub Sw28_Hit
If Tilted Then Exit Sub
AddScore 5000DTStatus(0)=1
AddBonus 1
UpdateBonusLights
DTLightsL
CheckLBankTargets
PlaySoundAtVol SoundFXDOF(“targethit”,107,DOFPulse,DOFContactors), Activeball, Vol(Activeball)*22.5
DTHit 28
vpmtimer.addtimer 200, “psw28.TransZ = -50 ‘”End Sub
Sub Sw29_Hit
If Tilted Then Exit Sub
AddScore 5000DTStatus(1)=1
AddBonus 1
UpdateBonusLights
DTLightsL
CheckLBankTargets
PlaySoundAtVol SoundFXDOF(“targethit”,107,DOFPulse,DOFContactors), Activeball, Vol(Activeball)*22.5
DTHit 29
vpmtimer.addtimer 200, “psw29.TransZ = -50 ‘”
End SubSub Sw30_Hit
If Tilted Then Exit Sub
AddScore 5000DTStatus(2)=1
AddBonus 1
UpdateBonusLights
DTLightsL
CheckLBankTargets
PlaySoundAtVol SoundFXDOF(“targethit”,107,DOFPulse,DOFContactors), Activeball, Vol(Activeball)*22.5
DTHit 30
vpmtimer.addtimer 200, “psw30.TransZ = -50 ‘”
End SubHave these Be 117
Sub Sw31_Hit
If Tilted Then Exit Sub
AddScore 5000DTStatus(3)=1
AddBonus 1
UpdateBonusLights
DTLightsR
CheckRBankTargets
PlaySoundAtVol SoundFXDOF(“targethit”,108,DOFPulse,DOFContactors), Activeball, Vol(Activeball)*22.5
DTHit 31
vpmtimer.addtimer 200, “psw31.TransZ = -50 ‘”
End SubSub Sw32_Hit
If Tilted Then Exit Sub
AddScore 5000DTStatus(4)=1
AddBonus 1
UpdateBonusLights
DTLightsR
CheckRBankTargets
PlaySoundAtVol SoundFXDOF(“targethit”,108,DOFPulse,DOFContactors), Activeball, Vol(Activeball)*22.5
DTHit 32
vpmtimer.addtimer 200, “psw32.TransZ = -50 ‘”
End SubSub Sw33_Hit
If Tilted Then Exit Sub
AddScore 5000DTStatus(5)=1
AddBonus 1
UpdateBonusLights
DTLightsR
CheckRBankTargets
PlaySoundAtVol SoundFXDOF(“targethit”,108,DOFPulse,DOFContactors), Activeball, Vol(Activeball)*22.5
DTHit 33
vpmtimer.addtimer 200, “psw33.TransZ = -50 ‘”
End SubYou need to login in order to like this post: click here
1 user thanked author for this post.
Amazing table and I’ve been very looking forward to this one so thank you! ( rules are so deep :o )
Question: I am using the 3scr b2s but the text is not showing on my 3rd screen, any way I can fix this?
@dsmehlho ( SkillShot )
The 3 Screen backGlass works fine with the latest BackGlass server — Nice job on the Game —
3 Screen setup – https://vpinball.com/forums/topic/3-screen-set-up-and-more/
To enlarge the wording on the 3rd screen I used this – https://www.vpforums.org/index.php?showtopic=40927&p=414013
- This reply was modified 3 years, 4 months ago by outhere.
- This reply was modified 3 years, 4 months ago by outhere.
You need to login in order to like this post: click here
So do you need a pin2dmd for this or will this color the standard dmd that pops up when you load the game?
Yes it will work on LCD
More help if needed — https://vpinball.com/forums/topic/freezy-dmd-question/#post-115676You need to login in order to like this post: click here
-
AuthorPosts