liebowa

[liebowa]

I love the quality and the remix, but am having a few issues with some phrases being played in the ‘old’ style, such as “Hey Buddy” and “you can have that back”.

Are those in this version of the AltSound?

Appreciate the work for sure!

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

• This reply was modified 3 years, 1 month ago by liebowa.

You need to login in order to like this post: click here

[liebowa]

Fantastic table!   It’s gorgeous and plays so well

I just had this same thing happen as @lembit reported above.  I’m not sure what path the ball was heading when it happened – but it got stuck in the same place:

Thanks for this great table and hope this feedback helps.

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

Attachments:

1. 

   IMG_2141.jpeg
   

You need to login in order to like this post: click here

[liebowa]

Spectacular.  Thanks for the replies!

Heading over to do a review and spend my 5 stars…!

 

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

1 user thanked author for this post.

Mike DA Spike

[liebowa]

Am I the only one that has issues entering my high score initials into this table?  I posted this a few months ago, but didn’t get any response.

I’ll get to the enter my initials panel, but no matter what I hit (flippers, magna saves, Start, Coin, etc.) I cannot select a letter – it simply enters in a blank character and moves to the next character until I’ve entered three blanks.

I’ve actually rebuilt my cabinet from ground up – including new OS install, all new downloads of all software, etc. – so I’ve tried everything.

Any thoughts?  I have many, many more tables on my cabinet – none exhibit this behavior.

Thanks in advance.

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[liebowa]

First off thanks for this program.  It’s incredibly handy and easy to use.

I have two items/questions for you that maybe are already in the system but I just don’t know how to use them:

1.) Is it possible to “bulk” create media for just those that you select in the table listbox?  In other words, rather than it creating media for ALL of the tables, is it possible to just create media for just those that you highlight in the tables box?

2.) Is it possible to reduce the amount of time that a video records for?  I’d like to just create 15 or 30 second videos, for example.

Thanks again for your efforts with this program.

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[liebowa]

Gorgeous and SO much fun!  Another gift to the community from these talented creators…  THANK YOU!

Quick question – which B2S is everyone using?

 

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[liebowa]

@paologiardina,

Click on this link to bring you to the Pizza Time page.
https://vpinball.com/VPBdownloads/pizza-time/

On the right-hand side of the page ( or at the very bottom of that same page ) you should see a dropdown box above the Download button.  Click that dropdown box and select “pizzatime.zip”, then click the Download button.

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[liebowa]

This is the same way it is with the real machine; https://pinside.com/pinball/forum/topic/dr-dude-owners

 

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[liebowa]

I *LOVE* this table, but I have one small question that I didn’t see anyone else mention in these 15 pages; I have a very, very slight flipper delay with this table.  This is the only table out of my 25 or so that I’ve ever seen this on.

After a few games, i start to get used to the delay, but for anybody else comin in cold, it’s noticeable to them.

Any thoughts on where I should start looking for this?

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[liebowa]

Just in case anyone else runs into similar issues, I’ve sorted my particular issue out.  I tracked it back to the PupPlayer installation files.  Apparently I had neglected to copy the files from the PinUPPlayerVPinMame folder into the VPinMAME directory.

It’s all working now.

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[liebowa]

I cannot get the pupshapes to show up.   I tried to follow the instructions verbatim, but immediately ran into an issue when I found that my dlls are not directly in the Visual Pinball folder, but are in the VPinMame folder.  I also didn’t have the pinup section in the ini file, so I added it manually, but still no luck.

I also have copies of the DMDDevice.ini and dll in a subfolder under VPinMAME called DMDExt.

Curious why my installation is so different than others, and what is my best approach to straightening this out.

Any help would be appreciated.

Thanks.

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[liebowa]

I had this exact same thing happen yesterday; ball would drain – no action for awhile, then suddenly the entire table would nudge twice, then after about 4 seconds a ball would pop into the lane ready to be launched.  Then the game would continue and never get past ball #2.  I let it go on for about five iterations of this before I killed it.

Thanks for reporting it – I completely forgot about it until I read this thread.

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[liebowa]

I know I’m late to the party, but just wanted to voice my gratitude for this table.  It’s loads of fun to play, and has become the “show off” table to my family and friends.  The lights, the sounds, the gameplay – everything is just amazing.

So, a very sincere “thank you” for this table.

 

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[liebowa]

I’m just starting out in this hobby, and finding all of these great tables.  This is gorgeous.

I have a question regarding entering initials for highscores.  It seems that the normal left/right flippers to change/select the letters aren’t working for me.

Can someone tell me which buttons are used?  Is there a way in the script I can find this for myself?

Thank you

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[liebowa]

A M A Z I N G table!  This is a blast!

I think I may have found a bug – I exceeded the 59000 points and got a free game.  Woo-hoo!  At that moment I saw the credits increase by one.  Then, though, at the end of the game, the credit went up yet again.  This happened to me twice.

Hopefully you can replicate it and address it for the next release!

THANKS!

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[liebowa]

Well now I feel like a complete idiot, but I’m glad that I know the answer.

Thank you for helping me out.

I’ll go hide under my bed now…

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[liebowa]

Sorry, the targets that the cheese slices “point” to = not the slices themselves.  The letters JERRY, for example.

The only thing I did was to rotate the board from 270 to 0 for display on my main monitor which is rotated to portrait.  This is the same that I’ve done with the other dozen tables or so that I have downloaded.

Is there something else that I can delete (registry entries or something) to try to clean up anything that I may have somehow mistakenly broken?

Thanks for your help.

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[liebowa]

I’m at 10.6 Final.

I just found a link to 10.7 BETA.  I’ll install and report back.

Thank you.

 

UPDATE.  Downloaded the BETA and copies over the 10.6 install.  Deleted the NVRAM file.  Same results.

 

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[liebowa]

Exact same as Dodger above.  None of the drop targets with the cheese slices work for me; the 5 for Jerry, the one directly across the playfield, nor the one under “Whap, Pow, Bam” on the left hand side.

I’ve deleted the .nv file, re-downloaded the table etc.

 

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[liebowa]

This is absolutely gorgeous.  I’m new to all of this, but this quickly became my go-to table to show my friends and family.

My only issue with this table is that all of the drop targets for JERRY will not drop.  A sound is made so it detects being hit, but the targets don’t drop.  I looked through the instruction card and through all 12 pages here, and I don’t see that this is by design, or that anyone else is having issues?

Does anyone have any thoughts around this?

Thanks.

 

------------------------------------------------------------

Cabinet Build:
- Computer: Intel i7 Processor, 16gb RAM, 512gb SSD, Nvidia 2060 Super
- Monitors: Playfield: 42" Spectre 4K / DMD: 17" Dell Monitor / Backglass: 32" Hitachi 1366x768
- Pinscape for Nudge, LedWIZ for lighting (strobe and flippers only, at the moment)

You need to login in order to like this post: click here

[Author]

Posts